Part Number: LM95172-Q1 Please tell me about a Reflow profile of lm95172-Q1.
Data sheet page3 aboslutte maximum ratings spec Soldering Information Infrared or Convection (20 sec.) 235℃
It is written in this way
Reflow peak 235℃ 20sec??
Hi Sagar,
Similar to the response you got from ADC, there is only one sensor in our portfolio with a 200C rating. It is in a large ceramic package just like the ADC.
LM95172-Q1
https://www.ti.com/product/LM95172-Q1
thanks,
ren
Dear Gnana -
We have plenty of parts which meet your speed, accuracy and package requirements, but the max temperature you specify is problematic for most semiconductor packages and most are soldered down using 260C peak. We do have one part rated to…
Part Number: TMP468 Other Parts Discussed in Thread: LM95172-Q1 Hi TI Team, We have a requirement of I2C based Temperature Sensor that can measure ~180-190 deg. C. We can have a BJT-based remote sensing approach. We have selected TMP468 for our application…
HI Faraz,
If you plan on molding the part into the tire the highest temperature part we have is the LM95172-Q1. This part goes up to 200C, but this does not guarantee that it will not get damaged in such an extreme environment though. Please review…
Hi Aaron, Thanks for your support. But the customer needs the sensor that can measure 0~200 °C. TMP107 can only measure -55°C to 125°C. It cannot meet the customer's requirement. Do we have any other temperature sensor?
I found there was only LM95172…
Hi Abhishek,
With the HDC1080, the temperature range that can be measure is from -40 to 125°C.
For temperaure sensor that works at higher temperature you can take a look to the LM95172-Q1 , that works until 200°C, but if you need more information…
Hi Michel,
Thank you for your inquiry.
Was there an attachment of some sort? (there a big blank spot in your reply that is why I ask.)
Can you please attach your schematic and the error transfer function you are seeing?
We did not observe…
Hi,
wayne lu1 said:
Although I still need to use power line to transmit the data about the motor's speed or something else to control the motor.
So, do I need to buy a new device or any software I can use?
if you wish implement motor control…
