Part Number: LM95235 On the LM95235 datasheet it states the following with respect to decoupling capacitors:
"VDD should be bypassed with a 0.1 µF capacitor in parallel with 100 pF. The 100 pF capacitor should be placed as close as possible to the power…
Part Number: LM95235 Other Parts Discussed in Thread: TMP431 Hi TI Team,
I would like to use the T_CRIT or OS pins available on your sensor to trigger when local temperature goes above the -5deg celsius.
Would be possible, in general, to set the T_CRIT…
Part Number: LM95235 Other Parts Discussed in Thread: ADC12DJ5200RF Hi
We are using LM95235 in our design for temperature measurement of ADC12DJ5200RF.
Can you please let me know about the data rate of differential (D+ and D-) lines?
I have not understood the management of Configuration Register 1 (and all other register shown in the datasheet with 2 byte). The Live Chat people say they cannot help me. My question is very easy. I don't understand the meaning of the address 0x03/0x09…
Other Parts Discussed in Thread: LM95235 Hi TI expert,
In my test, I found the temperature from LM95235 is about 12 o C bigger than the CPU internal sensor. However the CPU vendor claim the value is at 4~5 0 C deviation in Max.
The gap here may cause…
Other Parts Discussed in Thread: LM95235 what am i doing wrong?
just trying to get the LM95235 talking. A0 is grounded, so 0x18 is the address (0x30 & 0x31 for w & r). i get good ACK on everything, but the value bits are always zero.
as a sanity check…
Other Parts Discussed in Thread: LM95235 , TMP411 , TMP431 , TMP432 Looking to use the LM95235 with a processor with an internal thermal diode. With this processor however the diode cathode is connected to GND as opposed to how internal thermal diodes…
Other Parts Discussed in Thread: LM95235 , ADC12D1600RF , LM95233 Hi,
When using an LM95235 for measuring the temperature on ADC12D1600RF, which mode do I select to get the most accurate temperature readings on my High Speed ADC?
From the datasheet…
Part Number: ADC12DJ5200-SP Other Parts Discussed in Thread: TMP9R00-SP , LM95235 Can the TDIODE- pin be tied to ground?
I'm using the TMP9R00-SP to monitor multiple devices (including this ADC) and one of them needs the Common pin tied to ground…
