Part Number: LM96063 Tool/software: Data sheet says that thermal belly pad is required, however it does not state anywhere whether this pad is to be connected to GND or or other net.
The working assumption is that the thermal belly pad is NC and should…
Part Number: LM96063 Other Parts Discussed in Thread: AMC6821 , I would like to use this fan to control a 48V fan. However, the examples given in the datasheet are for a 5V or 12V fan. Can the resistor divider values be modified to safely be used with a…
Part Number: LM96063 Other Parts Discussed in Thread: AMC80 , LM96080 , LM96194 , LM94 , LM96000 , LM93 Hi,
We currently have a project for the Intel Q670 platform. We have a total of 4 fans (2x SMART FAN and 2x non-Smart 12V FAN). However, due to the limited…
Part Number: LM96063 Hi team,
Customer plan to use LM96063 in their project, they come to use check if we get any reference driver code for them, could you help check about this? Thanks.
Best Regards,
Will
Part Number: LM96063 Other Parts Discussed in Thread: TMP390 , TMP302 Hello, is there a programmer available that can be used to program the LM96063? Also, what software would be needed? The goal is to externally program the fan controller once. Thanks. …
Part Number: LM96163 Other Parts Discussed in Thread: LM96063 , Hi,
Good Day.
Customer had systems in production which use:
- LM96063
- External MMBT3904 diode (from Diodes Inc.)
He needs to know if there's a way to create equivalent functionality by installing…
Part Number: LM96063 Dear Sirs,
Is there any method for LM96063 to keep setting even power off and power on?
Such as ext. EEPROM mode to support self-initial while power on or store inside the LM96063,....
My customer did not want to initial it every time…
Part Number: LM96063 Other Parts Discussed in Thread: AMC6821 Hi there,
I'd like to confirm if LM96063 PWM can be enable by HW setting? From data sheet, PWM output need I2C to enable after power on. so any possibility, enable PWM by HW circuit?
Part Number: LM96063
Hello
I noticed for the LM96063 datasheet, it doesn't say explicitly what to do with the exposed pad on the package. Should it be tied to ground? Left floating? Something else? I also checked http://www.ti.com/lit/an/slua271b/slua271b…
