Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: LM96000 Other Parts Discussed in Thread: LM96194 , LM111 Hi,
Below is my customer design concept.
I'm going to propose LM96000x2 or LM96194*2 due to the device only support up to 3xPWM and 2xPWM.
As you see there are 4 host could send command…
Hi David,
Thank you for shipping the board to me. I reviewed your schematic and your board. I do not see any issue. The LM96194 provides two registers of 8-bit in order to form 16-bit register. So, in this case the PWM1 contains 9-bit register which…
Part Number: LM96194 Other Parts Discussed in Thread: LM96163 , LM63 Dear Team,
Originally I recommended LM96194 to my customer.
But they are considering competitor's EMC2305 and ADT7470.
Do we have more simple fan controller can compete with the competitor…
Hi Jeff,
Here is a link to our Fan Controller products: https://www.ti.com/sensors/temperature-sensors/digital/products.html#1241=Fan%20Controller&
Generally speaking, these products have a TACH input to monitor fan speed and provide a PWM output to…
Other Parts Discussed in Thread: LM96194 Hi,
The datasheet for LM96194 mentions that upon power up, the output pulse width of the reset signal is 250 to 330ms. Does this mean that the reset signal is held low for 250-330 ms by this device after its VCC…
Other Parts Discussed in Thread: LM96194 Hi,
I am using the LM96194 in my design. I am not using the following pins:
PROCHOT, GPIO[0:9], VRD1_HOT, REMOTE1−, REMOTE1a+, AD_IN3, AD_IN8 and VID[0:7]
Can you please let me know if the unused pins can be left…
Other Parts Discussed in Thread: LM96194 Hi,
On the page 12 of the LM96194 datasheet, the nominal voltage values for the voltage monitoring pins is mentioned.
Can you please let me know what is the tolerance for this voltage value? This will help me select…
Other Parts Discussed in Thread: LM96194 Hi,
I found in the LM96194 datasheet, that the MMBT3904 transistor is recommended to be used as a temperature sensor diode.
Can you please explain to me why a BJT is preferred over a 2-terminal diode for this application…
