Part Number: LM98640QML-SP Hello,
My customer has some questions about the LM98640QML-SP settings.
1. When using Sample&Hold Mode as Disabled and CDS Mode as Enable, does the Reference Buffer Power Level of Sample&Hold Register (0x06) affect the performance…
Part Number: LM98640QML-SP TI_Genius Kirby stated that:
"The LVDS output runs off of the 1.8V drive. The rest of the part runs off of the 3.3V supply. The Vih and Voh are for the SPI and not for the LVDS output. Please see the LVDS Output table for…
Hi,
This issue has been resolved on this thread - https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1280340/lm98640qml-sp-lm98640
Kindly use 2.5V I/O bank on your FPGA for the SPI I/O signals.
Thanks,
Ka…
Part Number: LM98640QML-SP Hi,
Good Day.
The LM98640QML-SP datasheet states a sample rate range from 5-MSPS to 40-MSPS. Our customer would like to use readout rates as low as 1 MSPS to reduce readout noise. Is there a limitation that does not allow…
Part Number: LM98640QML-SP
Please see attached document for copy of below text and copies of referenced images showing register setup and output waveforms.
Hi,
We are using the LM98640W-MPR Dual channel, 14bit 40MSPS AFE and we are unable to get…
Part Number: LM98640QML-SP Other Parts Discussed in Thread: VSP5611 , VSP5610 , VSP5612 Hi Experts,
Good day!
Our customer requires CCD readout at 1MHz to minimize noise. I have discovered that the LM98640QML-SP will not operate that slowly. Is there…
Part Number: LM98640QML-SP Dear Sir/Madam,
I am using LM98640QML ADC for one of my projects for data acquisition. Here My Video signal Voltage is 1.5 to 4.8V(Black level is 1.4V) we are scaling down to this signal to 0 to 2V by using op AMP .
So our…
Part Number: LM98640QML-SP Other Parts Discussed in Thread: LM98640CVAL Hello Expert,
Our customer is under design w/ this part.
They need the following materials.
1. Reference design files (Gerber or PCB Artwork)
If you send design file of LM98640CVAL…
Part Number: LM98640QML-SP
Hi Team,
My customer want to use device in a satellite application however the CCD that they are using has an output up to 15V. Looking in the datasheet it seems that it cannot handle 15V, is there a way to use device in…
Part Number: LM98640QML-SP The WaveVision interface code shared through the link below is not working any more.
https://txn.box.com/s/zlxixt7l8poa17qsd9727i667klh9y5a
The thread is also appears to be locked.
Please share the VHDL, Verilog code…
