Part Number: LMG3410R150 Other Parts Discussed in Thread: LM5022 , Hi
My customer needs a schematic review
The schematic cannot be disclosed. I'll send the schematic by personal message or email.
Let me know your personal message or email.
-SPEC-
…
Part Number: LMG3410R150 Hi
My customer is designing LMG3410R150RWHR. It is said that the pins below are not used.
-unusde pins-
pin 25(LDO5V) , pin 26(VNEG), pin28(BBSW), pin29(LPM), pin30(RDRV), pin32(FAULT)
I want to know how to handle it.
Thanks
Part Number: LMG3410R150 Hi Team,
Customer wants to learn the gate materials for our GaN devices, is it metal type gate or s chottky type gate?
Thanks.
Part Number: LMG3410R150 Hi Teams,
I am learning the appnote SNOAA14B Thermal Considerations for Designing a GaN Power Stage.
I noted that the paper mentioned high side GaN FET several times (see pic). What does this mean? The heat sink is designed for…
Part Number: LMG3410R150 Hello E2E,
the reset of the Fault signal is described by holding the IN Pin low for more than 350 µs. But within figure 17, there is PWM at IN and inspite
of this, the FAULT is reset after treset. Is this correct in the…
Part Number: LMG3410R150 Hi Team,
I have a question regarding pspice model of LMG3410R150.
I am using this cicuit as primary switches in half bridge LLC resonant converter topology, where Coss capacitance of the switch has important role in order to achieve…
Part Number: LMG3410R150 Hello E2E,
are you having more data about the behavior in third quadrant operation. At
the datasheet
- Min / max values of the voltage especially at 5 to 6 A
- voltage values over temperature
We use this GaN in hard switched…
Part Number: LMG3410R150 Hi,
The datasheet provides switching energy loss graph. Is this total switching energy loss or do I need to add loss from the gate driver and Coss to this value? Besides, is the given switching energy data for two FETs or one FET…
Part Number: LMG3410R150 Hi Team,
My customer has questions about SPICE model.
could you support following question?
1. when you open lmg3410r150.lib, you will find unreadable code in line 546 ~ 554 as following picture.
Do you think this should be fixed…
