Part Number: LMK05318EVM I am using the device for the first time and our application requires an output of 300MHz or 400MHz. Using the TICS Pro software i can re-program from the default 156.25MHz to 100MHz or 200MHz with the default settings in place…
Part Number: LMK05318EVM Hi Sir,
changed CH0_1 Freq. from 156250000 to 156262500 and pressd "Calculate Frequency Plan", but actual Freq. is displayed as 0 and the frequency point can not be adjust.
the attached file is currently configuration…
Part Number: LMK05318EVM My customer is evaluating LMK05318EVM. I would like to run Ref=100kHz,XO=16.8MHz,output=16.8MHz and then sync between ref and output. please kindly advice how to do that?
Best Regards,
Hironori Yoshimura
Part Number: LMK05318EVM Hi team,
Customer is evaluating LMK05318EVM and they want to make the IC output 200.704MHz for each channel.
The OCXO input is 10MHz.
Could you support this to generate the required frequency output?
Regards,
Noriyuki Takaha…
Part Number: LMK05318EVM Hello,experts
I opened a .tcs file from my friend today.When I want to default all the configuration,the tics pro was stuck in halfway of writing register and constraintly closed.Now I can't default the configuration.Even I delete…
Part Number: LMK05318EVM I am a Chinese student and I feel helpless now.There is wrong with the calibration apll1 and the pll1 lock detected of my evm and I think maybe there is wrong with the divice.so,could any enginner who is familar with this evm…
Part Number: LMK05318EVM Before, I have been using the 48MHz crystal refresh on the board as XO input. When I use the external precise 10MHz crystal as XO input, why can't DPLL lock?
Part Number: LMK05318EVM We are using:
TICS Pro v1.6.9.0
Build Date: 11-Dec-18
Part Version: 2018-12-11, v0.7.0, scripts=ee042ab1a7
We have a single-ended CMOS 3.3V PPS pulse connected to J6, PRIREF_P. PRIREF_N, the center pin of J7 is grounded. Using…
Part Number: LMK05318EVM I think the start of lmk05318 should follow the pll intialization sequence but I meet problem in the first and second steps,VCO calibration and aplls locked(free run from xo)
I used the plate-crystal calibration as the main clock…