Part Number: LMQ61460-Q1 Hi Team,
Ford request my customer provide the simulation of efficiency with same load, but different ambient temp. For example,
Vin = 13.5V
Vout = 3.3V
Fsw = 400kHz
Iout = 1.8A
Tamb(-40C~85C)
They would like to have the chart…
Other Parts Discussed in Thread: LMQ61460 , LMQ61460EVM 부품 번호: LMQ61460
This is a circuit with an output voltage of 8.7V for a 12V input. The output voltage is not output properly.
The picture below shows the waveform of the output. It does not output up…
Part Number: LMQ61460-Q1 Dear Team,
We are doing the Thermal simulation for the LMQ61460AAS with below spec, and seeing the case temperature is 230deg. we are not sure that, this could be right one we r looking at, could you pls nconfirm on this?
PD …
Part Number: LMQ61460-Q1 Other Parts Discussed in Thread: PSPICE-FOR-TI
I was trying to import the Spice model of LMQ16460 into tina for schematic but received this error while importing
kindly help me resolve this issue
Regards
Nakul.J.Gowda
Part Number: LMQ61460
Dear TI experts,
We are seeing a strange behavior of our LMQ61460 circuit. It is designed for 12V to 32V input, output 9.3V/5.5A, 450KHz switching frequency. Schematic is shown below.
So far it works and can deliver 5.5A output…
Part Number: LMQ61460 Other Parts Discussed in Thread: LM61440 , LM61460-Q1 , TPSM63606 Hello,
I'm an FAE for a distributor that handles TI products. I received a request from a customer for a product proposal for the purpose of improving efficiency…
Part Number: LMQ61460-Q1 Hello team,
The datasheet of LMQ61460-Q1 specifies the absolute maximum spec of Min=0V for PGOOD pin. It’s not allowed to get any negative voltage, unlike other pins (Min= - 0.3V). Also, the PGOOD can be grounded if not used…
Part Number: LMQ61460-Q1 There are inconsistency between Webench sch and datasheet information. There is a RESET_N pin at Webench. However when I checked from datasheet , there is no RESET_N pin.
I think datasheet is correct but I want to be sure. Could…