Part Number: LMR14030 Other Parts Discussed in Thread: LMR33630 Hi,
Customer is finding DCDC with input 12 to 24V and output 12V, current 0.5A.
Can LMR14030 support drop out mode when input voltage is below 12V?
If not, I would like to recommend…
Part Number: LMR14030 Other Parts Discussed in Thread: LM25117 , Dear Sir
We have a requirement for using a DC/DC buck with current monitor
Vin range is 9~36V Vout=5V/ ,Iout under 2A
Have any solution can do and have the current monitor (like…
Hi Ethan,
Thanks for the review.
1. At the input, parallel to 4.7uF you are suggesting to add 0.1uF?
2. you mean to say:To add some ceramic capacitor parallel to 56uF Electrolytic capacitor?
3. 8.2.2.4 section is not there in the datasheet : http…
Part Number: LMR14030-Q1 Hi, Team,
I just want to know the min and max value of Ien-hys and Ien-pin.
Is it possible to provide us?
Please let me know if this request should be in off-line.
Thanks in advance!
Best regards,
Koh Hamasa…
Part Number: LMR14030 Dear Sir/Madam,
Since the LMR14030SDDAR works for the range of 8V to 40V we have used the same regulator for both 12V and 24V battery systems. But our customers who primarily use 24V batteries report that the device is getting…
Part Number: LMR14030-Q1 Other Parts Discussed in Thread: LMR14030
Hi,
I would like to know behavior of the LMR14030-Q1 during in the case of reverse voltage condition.
For instance, the case is that mobile battery 5.2V is connected with Vout when…
Part Number: LMR14030-Q1 Other Parts Discussed in Thread: LMR14030 Hi team,
I have a question about the low side FET behavior which is built in LMR14030 for boot cap charge support.
When LMR14030 detects OVP, it stops its high side FET until the output…
Part Number: LMR14030 Hi,
Customer of mine is designing LMR14030 as part of their power management in car audio application
Specs as below: Vin = 12V (from car battery) Vout = 5V Iout = 3A Fsw = 2.2MHz
Could you help to review and comment the attached…
