Part Number: LMR38010 Other Parts Discussed in Thread: LM5017 Hello experts, Can we use LMR38010 for Fly-Buck topology same as LM5017? Thanks and best regards, Ryo Akashi
Part Number: LM5163-Q1 Other Parts Discussed in Thread: LMR38010-Q1 , Good morning
What is the maximum input leakage @150°C (or 125°C) of PGOOD port
(i.e. when voltage is regulated inside of the ‘good’ range , it should be a MOS --> Zero Gate Voltage…
Part Number: LMR38010-Q1 hi team,
now customer can't adjust the witching frequency , in the schematic, i have let customer adjust the RT resistor to 64.9k, but also can't adjust switching frequency, test scope of switching frequency is as follow:
Part Number: LMR38010-Q1 Other Parts Discussed in Thread: LMR38020
Hi ,
I found out using Webench that the LMR38010FS-Q1 is easily put into instability (Phase margin < 45°), e.g. for too small an output capacitance. What kind of response function…
Part Number: LMR38010 Other Parts Discussed in Thread: LMR36510
Hi Power Experts,
my customer is currently looking into LMR38010 and in LMR36510.
They did a simulation in Webench with a switching frequency at 500kHz. In the design a inductor value…
Part Number: LMR38010 Hi,
We have designed a buck converter based on the analog switcher - LMR38010F. We have added a few extra components to the converter after checking the circuit in WEBENCH tool.
Now, we have to check the stability of this buck…
Part Number: LMR38010-Q1 My customer has two applications for the LMR38010-Q1 where the output voltages are 20V and 30V. They are looking at using an electrolytic capacitor output instead of ceramic capacitors because the ceramic caps derate so much with…
