Part Number: LMR60440-Q1 Other Parts Discussed in Thread: LMR60440 Tool/software: Hello Team,
We found new opportunity of LMR60440-Q1 in Hyundai Mobis domain gateway.
My customer requests schematic review as below draft. Could you please support?…
Part Number: LMR60440-Q1 Tool/software: In my circuit, FPWM mode is selected by default (mode pin connected directly to RT), when probed at the sw node, i could see duty cycle only varying at fixed switching frequency, when no load is connected. I have…
Part Number: TPS63700 Other Parts Discussed in Thread: LMR60440-Q1 , Tool/software: Hello team!
I'm working on a power supply with a customer who develops T&M, they need to add a negative -12,5v supply to the board,
Right now we are considering…
Hi Kim,
This could be because of Wide Vin buck not able to regulate the Vout properly when the input voltage is reaching to 4.25V.
PMIC input (VCCA) , 3.3V, may not be stable and causing PMIC to shutdown and go to safe state and if the ENABLE is HIGH…
Part Number: LMR60440 Other Parts Discussed in Thread: LMR60410-Q1
Hello TI Team,
We have a question regarding the SW pin absolute maximum rating of LMR60440.
In the LMR60410-Q1 datasheet, the following note is described:
"Do not externally drive…
Part Number: LMR36006-Q1 Other Parts Discussed in Thread: LMR60440 Dear team,
My customer finds that MPS might have shortage in the near future, so they came to me and want to know if we have replacement for the following DCDCs. Could you help to…
Hi Ajay,
Your board has the same copper oz that we used on the 4 layer EVM. Should be ok. Worst case you use 4A variant of LMR60460-Q1. Which is P2P and has better FETS than LMR60440. I don't see online, so you will have to ask the local FAE for more…
Part Number: LM5148-Q1 Other Parts Discussed in Thread: LM5137 , LM5176 , LMR60440 , LM70880 Hi team, We are developing a custom carrier board for Nvidia Jetson Thor T5000 SoM. Could you suggest me the best suitable regulators for the below power requiremets…
