Part Number: LMS3635-Q1 Other Parts Discussed in Thread: LM61435-Q1 , LM61440-Q1 , LM61440 , LM61460
Hello,
I am an FAE for a distributor that handles TI products. The customer is considering the LMS3635-Q1 with the following specifications. The customer…
Part Number: LMS3635-Q1 Hello everyone.
In my design I am using LMS36353QRNLRQ1 buck power supply 3.3V 3.5A. +-1.5 reference voltage tolerance. Today I started test validation procedure as at some points I have to load it up with 0%, 50% and 100% of the…
Part Number: LMS3635-Q1 Hi,
I used WEBench for a 3.3V regulator using the LMS3635-Q1. On implementing it on board we arent seeing any output from it.
I ensured that it was getting 12/24V input and the EN signal was high.
Also checked the voltage at the…
Hello,
You can refer to the device datasheet for the pre-regulator and PMIC which will provide all of the details on these parts.
LMS3635-Q1 3.5-A, LMS3655-Q1 5.5-A, 36-V Synchronous, 400-kHz Step-Down Converter datasheet (Rev. C) (ti.com)
LP87702-Q1…
Part Number: LMS3635-Q1 Tool/software: WEBENCH® Design Tools I am trying to use Webench to estimate efficiency for two designs, one with a 1.4V output and one with a 2.2V output. The device should support it, but the Webench tool will not allow an output…
Part Number: LMS3635-Q1 Other Parts Discussed in Thread: LM5141 , LM25141
Hello,
I'd like to design DC-DC converter circuit to supply 5VDC to Raspberry Pi 4 board and 7" touch screen LCD module. Here are my requirements:
input: 24VDC output: 5…
Part Number: TPS7A57 Other Parts Discussed in Thread: LMS3635-Q1 , LM1084 Hi!
I'm using TPS7A5701 chip in compination with LMS3635-Q1 DC-DC. The idea was to create a voltage follower with clean output. The problem is that I see a sine wave with the frequency…
Part Number: LMS3635-Q1 Other Parts Discussed in Thread: LM73605-Q1 , LM53635-Q1 Hello
When i was reading LMS3635-Q1 datasheet, i am confused by the thermal information provides. There are two different thermal information, what're the differences?…
