Search tips
Showing 25 results View by: Thread Post Sort by

  • CC2640 BLE Module with LMT85 temperature sensor

    Other Parts Discussed in Thread: CC2640 , LMT85 , SMARTRF06EBK Hi, We are planning to use LMT85 temperature sensor with CC2640 BLE Module for our BLE Beacon project. We want temperature sensor to be on when beacon will transmit which we have set time of 1s(Advertising…

  • CC2640 BLE Module with LMT85 temperature sensor

    Other Parts Discussed in Thread: CC2640 , LMT85 Hi, We are planning to use LMT85 temperature sensor with CC2640 BLE Module for our BLE Beacon project. We want temperature sensor to be on when beacon will transmit which we have set time of 1s(Advertising…
    • Answered

  • About Pin out of LMT84 / LMT85 / LMT86 / LMT87 (DCK package)

    Resolved
    Other Parts Discussed in Thread: LMT84 , LMT87 , LMT86 , LMT85 Please let me know about 2 point below of LMT84~LMT87's DCK package. ①Why these devices difference pin out? 　For example, LMT86's 1-pin is GND, but LMT87 is VDD. 　（I think thar If these…
    • Resolved
    • Answered

  • LMT86: dropped-in alternative to LMT86QDCKRQ1?

    Resolved
    Part Number: LMT86 Other Parts Discussed in Thread: TMP235 Team, Apart from the different LMT86 OPNs ( LMT86 vs LMT86-Q1 ) do we have some P2P dropped-in alternatives for LMT86QDCKRQ1 ? Apart from the mV/Deg C difference what would need to be taken into…
    • Resolved
    • Answered

  • LMT86 data sheet, LMT85 data sheet, User's Guide for the LMT84-7 errors for DCK package pin out

    Resolved
    Other Parts Discussed in Thread: LMT85 , LMT86 , LMT84 , LMT87 DATA SHEET ERROR -- LMT85 Analog Temp Sensor Data Sheet (SNIS168B) on page 4 the pin definitions and pin out for DCK package do not match between the diagram in the upper left and the Pin Function…
    • Resolved

  • RE: LMT84: Vout value

    Hi Gordon I will check it again. Maybe temperature and Vout voltage is ok.. These are my answers as your questions. Refer to as below What is the measured VCC voltage on the LMT85 device? - VCC voltage on the LMT85 device is 5 V. What it the measured…
    • Answered

  • TMP116: TMP116 Thermal Time Constant

    Resolved
    Part Number: TMP116 Other Parts Discussed in Thread: LMT85 , , TMP117 Hi Previously we are using LMT85 ambient temperature reading. But since we are trying to use digital temperature instead. We plan to use the TMP116, however we can not find thermal time…
    • Resolved
    • Answered

  • RE: LMT84-Q1: Recommended Series Resistor for Capacitive Load with 100nF

    Resolved
    Hi Jalen, Thanks for your quick response. I already had recommended to use 1.5 kohm series resistor as LMT84-Q1 datasheet recommended and as explained in the below e2e post. https://e2e.ti.com/support/sensors/f/1023/t/682737?tisearch=e2e-sitesearch&keymatch…
    • Answered

  • RTOS/CC3220MODA: Cheap temperature sensing solution for CC3220MODA

    Resolved
    Part Number: CC3220MODA Other Parts Discussed in Thread: TMP75 , LMT85 , TMP235 , LMT84 Tool/software: TI-RTOS Team I am trying to read temperature (overall system) using CC3220MODA using its ADC pin and need help in identifying the cheapest solution &…
    • Resolved
    • Answered

  • RE: ADS1248: PGA temperature effects and calibration questions

    Resolved
    Thanks for checking in Joseph. It turns out that part of the problem was that their design was violating the PGA common mode range: "Page 5 states an external Vref should be less than your analog supply minus 1. So let’s say you have 3V analog but…

Didn't find what you are looking for? Post a new question.