Part Number: LMV341-Q1 Other Parts Discussed in Thread: LMV341 Dear all,
Could you teach me about the specification of VICM at V+=5V?
You define that Typ: -0.2~4.2V and Max: 4V.
Why maximum value is lower than typical value?
In addition, this specification…
Part Number: LMV341 Hello,
Our customer use the LMV341.
For reduce a current consumption, the customer use a shut down function.
When the customer de-assert the nSHDN pin, there is a glitch noise as follows.
LMV341_glitch.pdf
A glitch level is related…
Part Number: LMV341 When in shutdown, do the inputs remain high impedance? I'm going to use it as a follower but I can't load the source when it is shut down..
Part Number: LMV341-Q1 Dear all,
I cannot find input capacitance value of this device from data sheet.
Could you teach this input capacitance value?
Best regards,
Part Number: LMV341-Q1 Dear all,
Could you teach about input capacitance value of SHDNB pin?
I would like to calculate how long does it take to shutdown.
It may be difficult to say specific value.
Could you say that it may be equal to or less than xxx…
Part Number: LMV341 We use an LMV341IDCKR op amp as part of our design for voltage sensing. The uniploar supply voltage is 5V. The input voltage can be expected to vary between 0 and 80V and there is a resistor dividet to step it down. We have sever of…
Part Number: LMV341-Q1 Other Parts Discussed in Thread: TINA-TI , LMV341 , LMV342 Tool/software: TINA-TI or Spice Models Dear all,
Does this device have SPICE model (*.LIB or *.OLB)?
Best regards,
Part Number: LMV341 Hi,
I want to use this amplifier for the voltage follower circuit.
However, when I simulate the circuit, the gain characteristic seems to be unstable with capacitive load (0.2uF or so).
As a common countermeasure, there is a method…
Hi Rengui, If you'd like similar devices with specified maximum values for the parameters you're looking at, look at the LMV341 and the LMV931-N. Those devices have similar electrical performance characteristics and have more testing done (which will…
Other Parts Discussed in Thread: RM48L952 , LMV341 I have optimized the HDK Rm48L952 (replaced ZWT package with PGE). and also removed the unwanted ports from the kit . also remover ISSI bga package ic (SDRAM module).
while i try to connect Optimized kit…