Other Parts Discussed in Thread: LM2903B , LM393LV , LMV393 Hello team,
Do we have similar comparator with NJM2403M?
This device will be EOL. And the key specs are following.
1. Open Collector Output
2. Low Output Saturation Voltage VoL (see below…
Franz,
To clarify, do you mean to power your comparator at Vs = 5V? Therefore the upper bound of the common mode range for the LM2903 would be 3V. However you are looking for a pin to pin compatible device that would support a common mode of 4V at Vs…
Hello Takahashi-san,
I found some LMV393 over temp data. It is in raw tester data form and will take a bit to format for customer use.
We did not originally characterize at 100C and 3.3V, but will have to interpolate between 85C and 125C and 2.7V…
Part Number: LM293 Other Parts Discussed in Thread: LMV393 Hello,
I'am using LM293DGK on my design supplied with a 3V3.
I would like to know if you can send me a curve of the common mode input voltage range as a function of temperature?
(in fact…
Hi Daisy,
Here are a list of TI candidates:
1. DIODES AZV331KTR-G1 --> TI device TLV 7021 (open drain, micro power, 350 ns prop delay)
2. DIODES AZV393MMTR-G1 --> > LMV393 (dual channel, open collector) (alternative TLV1702 (dual channel, open drain…
Part Number: TMS320F280049 Other Parts Discussed in Thread: LMV393 Tool/software: Code Composer Studio We use GPIO18/X2 (pin68) for XBAR4 function. This pin is connect to a comparator's(LMV393) output., which is pull up to +3.3V. The question is: this…
Other Parts Discussed in Thread: LMV393 , LM393 , LMV393-N , TLV7256 Hi
I am looking for low current and low cost comparator. LMV393I is matched with our requirement.
However the specification is not specified on the datasheet.
http://www.tij.co…
Hi Peter
My apologies...I was looking at the TL331 in the last post..The lit number should start with SLCS136 for LMV331.
Okay...You must have the SLCS136A datasheet (Jan 2000) and looking at the Available Options table.
All the devices are missing…
Shlomi
For more headroom on the input, you could consider switching to the LMV393.
And if you can handle using single channel devices, your suggestion of switching to the TLV7041 or the TLV7021 would provide rail to rail input capability at significantly…
