Part Number: CD74HC4538-Q1 Hi TI expert,
May I know what is the difference between CD74HC4538QM96 G4 Q1 & CD74HC4538QM96Q1?
G4 version is OK to order & OK to ship.
Non G4 version is not available.
They share the same datasheet.
Please kindly let us…
Part Number: TPS22810-Q1 We have a requirement to derate mosfet Vds to <40% of rated survival voltage.
This part is essentially just an N-FET and the part gives an absolute max input voltage of 20V. Is this due to risk to the fet itself due to it…
Part Number: TPS99001-Q1 Other Parts Discussed in Thread: TIDA-080007 Hello. Currently evaluating the LED Driver control signal (white LED) for DMD headlights. The "LS_SENSE(N/P)" signal is included in "Figure 8-1. Headlight System Block Diagram" of the…
Part Number: DS90UB953-Q1 Hello team,
My customer tried to configure register 0x06/0x07 for CLKOUT=27MHz.
They use 954 sync mode with 24MHz Ref CLK.
I searched E2E and found jitter amount is depend of whether N/M value is integer or fractional.
if so…
Part Number: LM74700-Q1 Hi Expert,
Our customer would like to use MCG53N06AHE3(DFN3333) for LM747000-Q1 application. The work condition is as below. Please help to check if this N MOSFET is applicable or not. Thanks.
MCG53N06AHE3(DFN3333)-V2.pdf
BR,
…
Part Number: LMV321-N-Q1 Other Parts Discussed in Thread: OPA2365 , LMV321 , TLV6001-Q1 Hi,
I'm used LMV321-N-Q1 for PFC input voltage feedback.
OPA supply voltage is 3.3V.
When opa input is 110v, the output voltage be clamped arond 2.06v.
(CH1: OPA…
Part Number: LMV358-N-Q1 Hi,
What are main differences among:
LMV358Q3MM/NOPB vs LMV358IDGKR
From comparison table it is not so evident.
Thanks,
Antonio
Part Number: TPS92518-Q1 Other Parts Discussed in Thread: LM3409 , TPS92518 Hi Team,
Based upon the TPS92518-Q1 datasheet, it appears that the device is able to drive N-channel and P-channel FETS. Would it be possible to help me understand when it makes…
Amelie,
FA would not helpful because all the DC tests would pass (because the test system and op amp will be stable) and the AC test are only typical values.
Because the out can't be verified, I suggest changing to an op amp that has higher immunity to…
Part Number: UCC27284-Q1 Other Parts Discussed in Thread: UCC27284 Dear TI Team,
this is regarding an application circuit of : Half-Bridge Gate Driver to Drive a High Side Back-to-Back N-MOSFETs (in Common-Source Configuration)
When we disabled HI, we…