Viktorija,
Is the customer trying to get both bandwidth signals up converted at the same time on a single DAC or two DAC's? In either case, this can be done with a single part. Do they want the signals up converted to all four frequency bands at the…
Multi-Device Synchronization of JESD204B Data Converters_Apr2016.pptx Guy,
As long as all three parts are setup for subclass 1 mode, and the SYSREF is source synchronized to the device clock, and all three device clocks are synchronized, you should…
Part Number: AFE7444EVM Other Parts Discussed in Thread: AFE7444 I have read through all the user manuals and application notes for the AFE7444EVM to place it in Rx-Tx loopback mode. I found the attached configuration file which I found by searching other…
Kevin,
You cannot shut down the JESD section but you can use the DAC as a DDS pretty easily. See the attached documents for more information. One of these references the TI RF DAC, but most of the document is also applicable to the DAC38J82.
Regards…
Channamallesh,
The schematic is attached. FYI, the board design files can usually be found under the product folder on the TI website.
Regards,
Jim
TSW40RF82EVM-SCH_A.pdf
Ikon,
1. Are you trying to synchronize two DAC38J84 setups? if so, see attached document for more info.
2. Source code is attached.
3. This interface allows the user to use a eye scan feature to analyze the serdes inputs.
4. SIF is software interface…
Daniel,
TI no longer supports the TSW14J56EVM as it is now obsolete. The firmware developed for this platform was done by a third party, which no longer supports TI. The board has a JTAG connector that will allow you to download your own custom firmware…
Chaithra,
I do not know much about the AFE5818, but no ADC is perfect and every capture will be slightly different due to the lower bits of the ADC toggling.
For your other questions, please see the attached HSDC Pro User's Guide.
Regards,
Jim…
