Part Number: LMX8410LEVM Other Parts Discussed in Thread: LMX8410L Hello,
We're currently testing the LMX8410L evaluation module. EVM and Voltage gain abnormal phenomenon need to be resolved.
Here is our testing environment: Signal generator : Keysight…
Part Number: LMX8410LEVM Hello everybody!
May I ask about LMX8410LEVM layout gerber files or 3D model in STEP format?
We use evaluation board as test equipment and want to package, providing it's safety from service personnel.
Other Parts Discussed in Thread: LMX8410LEVM Greetings,
I am using the I/Q demodulator evaluation board. I've followed the helpful LMX8410LEVM Walkthrough video to setup and test the device. Everything works fine except the I/Q channels are not 180 degrees…
Part Number: LMX8410LEVM Other Parts Discussed in Thread: LMX8410L
Hello,
We are trying to evaluate LMX8410LEVM and checked LO_P and IF_IM output but the result was not expected.
LO_P power was -50dBm as attached and there is no IF_IM signal(20MHz).…
Hi
Thanks for your reply. there are still some questions about it.
Which EVM file do you refer to. I just downloaded file snau225a on the production website page, but it looks there is no pin number in this schematic. So I don't know which one is pin34…
Part Number: LMX8410L Other Parts Discussed in Thread: , LMX2594 Hi,
I'm using the LMX8410L's LO as output. I have the LMX8410LEVM board. I put 50ohm resistors on the board as LO pull-up. According to the datasheet Fig 44, shall I expect 2dBm output…
The board files can be found here: LMX8410LEVM.zip
The EVM for final release will be slightly different, mainly some RF/LO/IF trace impedance tuning. But in terms of thermal pad design and package dimensions, there is no difference.
Regards,
Hao
