Part Number: LMZ10503EXT Other Parts Discussed in Thread: TPSM82813 Hi,
I use the WEBENCH to simulate the bode plot for LMZ10503EXT.
This condition of the design is as below.
Vin (min/max) = 3.1/3.5
Vout = 1.05
Iout max = 1.5
Temp = 30C…
Part Number: LMZ10503EXT Other Parts Discussed in Thread: LMZ10503 What is the MTBF/FIT data for LMZ10503EXTTZ/NOPB? It is not given in MTBF and FIT Rate Estimator page.
Part Number: LMZ10503EXT Hello,
The datasheet for this device has an example for converting 5V to 2.5V (sections 8.2 and 8.3). When I enter the resistor values for Rfbt and Rfbb given in the datasheet into Webench, it complains saying that the values…
Part Number: LMZ10503EXT Hi there,
I am now simulating through the Power designer to verify the output voltage characteristics of the LMZ10503EXT.
As a result of the simulation for the circuit below(Rfbt, Rfbb, Rcomp = 0.1% Resister), 1.2V output…
Hi,
We have updated the LMZ10503EXT in WEBENCH Power Designer so that the recompensation utility works fine now. Thank you again for alerting us to the problem.
Part Number: LMZ10503 Other Parts Discussed in Thread: TPSM82823 , TPSM82813 Tool/software: Hi,
LMZ10503TZ and LMZ10503EXT parts both are ROHS with Exemption, May i know the Lead percentage used in these two components?
Part Number: LMZ10503 Hi Experts,
Our customer is comparing the datasheets for the LMZ10503 and the LMZ10503EXT . In both datasheets, section 10.3 gives an example thermal calculation based on the same requirement of Vin=5V, Tamb=85C, and load out…
Power quick search returns a lot of options:
LMZ10503
LMZ10503
Step-Down (Buck) Module
3
2.95
5.5
0.8
5
7PFM
3.75 | 1ku
TPS84320
4.5-V to 14.5-V Input, 3-A Synchronous Buck, Integrated Power Solution
Step-Down…
Other Parts Discussed in Thread: LM3150 Hi,
I'd like to ask about the need of external ripple injection circuit for LM3150.
According to the attached PDF file page 14,
It saids that we need the external ripple injection circuit when the output voltage…
