Part Number: LMZ10505 Other Parts Discussed in Thread: TPSM82866A Please provide the Mean Time Between Failures (MTBF) and Failure In Time (FIT) document for below part numbers:
LMZ10505TZE-ADJ
Part Number: LMZ10505 Greetings, We noticed that the actual die marking for the LMZ10505TZ-ADJ/NOPB power module is LM2854B.
Would you confirm that LM2854B is the correct die marking for LMZ10505TZ-ADJ?
Thank you
Part Number: LMZ10505 Other Parts Discussed in Thread: TPSM82866A What is the MTBF/FIT data for LMZ10505TZ-ADJ/NOPB? It is not given in MTBF and FIT Rate Estimator page.
Part Number: LMZ10505 Other Parts Discussed in Thread: TPSM82866A Hi, Good day. Our customer is looking for the ESD level (CDM) for the LMZ10505TZX-ADJ/NOPB. Can you please help us? Thank you. Regards, Cedrick
Part Number: LMZ10505 Other Parts Discussed in Thread: TPSM82480 ,
Hi,
I am using LMZ10505TZ-ADJ/NOPB in my design for 5V to 2.5V conversion. I have attached the schematics. Can someone please review the schematics and let us know your feedbacks on…
Part Number: LMZ10505 Hi - We're evaluating this part but we've had two failures where the input and output are both shorted to GND. Can you explain what could cause that to happen?
Vin = 5V, from a bench PSU
Vout = 3.3V
Iout = 2A resistive load…
Part Number: LMZ10505 Other Parts Discussed in Thread: LMZ14203EXT Hi,
I would like to use DC/DC converter for MIL-STD-883 standart performed. If you have any device for this application, please let me know.
Input 36V
Output 3.3V/2A
Thanks!
Hi Dave,
I went onto the LMZ10505 product folder and used the WEBENCH Designer tool for application: Vin= 5V, Vout = 3.3V, Iout= 3A and was able to perform a startup simulation. Also was able to perform load transient and standby. However, I do noticed…
Part Number: LMZ10505LMZ10505 being used to regulate from 5V down to 1.8V.
A number of these circuits have failed and it appears that the internals of the regulator have been damaged.
In a couple of cases it appears that the internals were damaged…
