Part Number: LMZ14202 Tool/software: Hello,
can I make the output adjustable (8-18) by changing RFFB with an digital potentiometer and set Ron to 300 kOhms and setting Cout to 100uF (ESR <50 mOhms) ?
Or do you have a similar IC with adustable output…
Part Number: LMZ14202 Other Parts Discussed in Thread: PSPICE-FOR-TI Hi Team,
I'm trying to simulate LMZ14202 part using TINA simulator for 24V to 5V conversion as shown in the below
I tired to simulate but getting below error
Request to assist…
Part Number: LMZ14202
Hi all,
I have been simulated this simple switcher using Pspice for TI. As its datasheet states, the switching frequency can be calculated using a formula.
Anyway, by using a specific value for Ron, the calculated frequency…
Part Number: LMZ14202 (Assigned) customer is using LMZ14202 and would like to measure stability over temperature of their particular design.
They have noted the following statements in the datasheet:
“The control architecture for this part is a…
Part Number: LMZ14202 Hi Team,
I designed a circuit for following conditions
Input voltage = DC24V
Output voltage = DC 3.3 V
Q1: supplying input voltage
24V → 15 V (continued for 30 milliseconds) → 24 V
If an instantaneous power supply…
Part Number: LMZ14202 Hi Team,
I designed a circuit for following conditions
Input voltage = DC24V
Output voltage = DC 3.3 V
Q1: supplying input voltage
24V → 15 V (continued for 30 milliseconds) → 24 V
If an instantaneous power supply change…
Part Number: LMZ14202 Other Parts Discussed in Thread: LMP8646 , LMZ14201
We have a situation where we are seeing approximately 0.9V on the output of the LMZ14202 when the EN pin is low (close to 0V) and the input supply is ~ 24V.
The load is a passive…
Part Number: LMZ14202 Hi everyone, I am planning to use the LMZ14202 power supply in a new design. I found in the datasheet the radiated EMI test information but nothing about the conducted emission. Do you have any information about conducted EMI test…
Part Number: LMZ14203EXT Hi, Good day. Our customer is looking for the possibility to use the LMZ14203EXTTZ/NOPB in place of LMZ14202TZ-ADJ/NOPB as they are having sourcing issue. They want to confirm if they can do use it without changes to existing…
