Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Hi David,
Let me take a LMZ20502EVM and configure for Vin = 5V Vout = 1.2V with you BOM selection
Cin = 110uF
Cout = 22uF
Rfbt = Rfbb = 40.2kOhm
This way I can test on a known good unit and see if any issue occurs.
Regards,
Jimmy
Hi Beth,
Were you able to get the waveform of the failing issues? Also what type of load are you using (resistive or electronic)?
On my end I took a LMZ20502EVM and tested startup on 2A load. There was no issue on the EVM given the following conditions…
