Part Number: LMZ22010 We are planning to buy bulk quantity of the below mentioned parts for our projects. So, I need few details about it, please explain in detail.
How much area is required to store 3000 quantities of the part ( LMZ22010TZ/NOPB …
Part Number: LMZ22010 Other Parts Discussed in Thread: LMZ22008 , LMZ23610 , LMZ13610 Hi Team,
Is there a recommended part number to P2P replace LMZ22010TZE?
Thank you.
Best Regards
Darren
Part Number: LMZ22010 i have question about LMZ22010。 I grounded SYNC。It resulted in a fixed spurious 359 kHz of my RF signal 。I don't know how to deal with this mess. Below is the schematic diagram of my design.
Thank you. I look forward to hearing…
Part Number: LMZ22010 Hi,
Following our lab experiment with the LMZ22010 Evaluation Board,using the EN pin in 1HZ (according to your recomendation), we found that 1Hz is not good enough. And we need to toggle the EN pin between 10HZ to 20Hz. So my questions…
Part Number: LMZ22010 Hi,
I think of using the LMZ22010 as TEC driver( TEC is Thermoelctric Cooling).
The TEC needs up to 8A and up to 6V. If the temperture is too hot, need to supply 6V/8A to the TEC and if it's to cold, need to turn off the LMZ22010…
Part Number: LMZ22010 Hi Team
1.Please provide Example Schematic (Vin = 12V, Vout = - 4V)?
2.(Vin = 12V, Vout = - 4V)This is good design for LMZ22010 ?
3.There are more suitable IC for this condition ? (Vin = 12V, Vout = - 4V , Iout = 8A)
Thank…
Part Number: LMZ22010 The requirement is that the part must be able to be synchronized to an external spread spectrum frequency modulated (SSFM) clock source that has it's clock frequency spread over a bandwidth that is +/- 10% of the set frequency. …
