Search tips
Showing 40 results View by: Thread Post Sort by
    Answered

  • RE: Request for 'DC/DC switching regulators' recommendation.

    Resolved
    Hi Grady, You can consider LMZ30602 (2A) which is QFN package. There are other devices (TPSM82821 - 1A; TPS82084 - 2A) adjustable Vout function as well but it is in uSiP package. Please refer to the datasheet below for reference. Best regards…

  • TPSM82821: Recommendation

    TI Thinks Resolved
    Part Number: TPSM82821 Other Parts Discussed in Thread: LMZ30602 , TPSM82864A Hi team, My customer is looking for a buck module in CT detector to replace EN6310QI. The requirements are as below: 1. 5V input and 1.1V output. 2. Output current is…

  • LMZ31710: Output Impedance Model for PDN analysis

    Part Number: LMZ31710 Other Parts Discussed in Thread: LMZ30602 , , LMZ31707 Do we have an output impedance model for the LMZ31710 module? Customer needs to run PDN power integrity analysis of their power design supplying an FPGA. This design also includes…

  • LMZ31704: LMZ, connect INH together ?

    TI Thinks Resolved
    Part Number: LMZ31704 Other Parts Discussed in Thread: LMZ22010 , LMZ31520 , LMZ30602 , , LMZ31707 Dear Sirs, For a FPGA power supplies sequencing, I need to cascade these supplies: LMZ22010 (POK) => | (INH) LMZ31520 (POK) | | (INH) LMZ31704 …
    • Answered

  • LMZ31503 : external pull-up resister on INH pin

    Resolved
    Other Parts Discussed in Thread: LMZ30602 , LMZ31503 Dear specialist LMZ30602 datasheet describe do not place an external pull-up resistor on INH pin while LMZ31503 datasheet does not mentioned it. Since our customer think LMZ30602 and LMZ31503 are…
    • Resolved
    • Answered

  • RE: LMZ31710 INH Internal resister value

    Resolved
    Hi, Arrigo Thank you for your anwer. I have more two questions. Isn't there an internal resistor diveider like LMZ30602 in the INH terminal for LMZ31710? e2e.ti.com/.../457775 Don't you depend on input voltage for the voltage when making the…

  • RE: PcBLib was generated without Footprint

    Thank you for your response. Acctually, the problem is with the download of LMZ30602 and LMZ35003.
    • Answered

  • RE: Alternatives to LMZ10505 with Same Package, but Higher Reflow Temp Limit

    Resolved
    James, I don't think we have any part that can meet your needs exactly (package variations, that is). Perhaps the LMZ3 can fit your application. LMZ30602, LMZ30604. www.ti.com/.../qfn-package-modules.html Thanks, Anston

  • RE: TPS62A01: TPS62A01 interference with GNSS

    Hello Abhishekh, thanks for reaching out in E2E. To reduce EMI, a good layout and filtering techniques can help. It is important to have vias close the IC GND pin as well as the GND pad of all input and output caps (see the GND vias in Figure 4-1…

  • RE: TPSM8287A12: How to better suppress the transmission of noise from high-frequency switching power supplies

    Hello, The TPS62810M, TPS628304, TPS62827A or TPS62A04AB would match these requirements. Do you have more specific requirements, such as fast load transient response, light load efficiency, adjustable switching frequency, I2C control, etc.? Then I…

Didn't find what you are looking for? Post a new question.