Part Number: LMZ34202 Dear Team,
The SENS + pin is connected close to the load (long cable). What if this SENS + line (pull down on this line) is broken? How wouldthe LMZ34202 react? Is the device going to try to regulate at 0V?
Regards
Andreas
Part Number: LMZ34202 Other Parts Discussed in Thread: LMZ31704 Hi Experts,
My customer want to use buck module to step 15V input down to 5V output. The problem is there is >2200uF of capacitance on 5V rail, however all our buck module specified a max…
Part Number: LMZ34202 Hello E2E,
Is there the document for dimension of foot pattern? Please show me TI recommended dimension of foot pattern of LMZ342020.
Regards, ACGUY
Other Parts Discussed in Thread: LMZ34202 , LMZM33604 , LMZM33606 , LM2596 , TPS563208 , TPS56339 Dear Experts,
Currently working with GPS Tracking for Vehicle i am using lmz34202 for power supply, i want to replace the module with the best regulator
Note: that…
Part Number: LMZ34202 Hello
In the datasheet it is specified that AGND and PGND must be seperated. We understood that agnd doesn’t need to be connected to another ground because of the internal connection between agnd and pgnd we thought that it will…
Other Parts Discussed in Thread: LMZ34202 , TPS54227 , TPS54228 Dear Experts,
now i am working for vehicle tracking system that components need max 2A, so i was choosed LMZ34202 but that component cost is 800/INR, so it makes my module development cost is…
Part Number: LMZ34202 Looking to use the PWRGD pin to turn on a LED. Was planning to have PWRGD_PU pulled to VOUT, LED w/series resistor from VOUT to PWRGD. I cannnot find the current limits for PWRGD. I want to make sure it can act this way.
Part Number: LMZ34202 Hi,
My customer wants to use LMZ34202 with synchronization function of RT/CLK pin. Customer uses clk which is changed frequency dynamically.
For example, 600kHz(for 90us) -> 400kHz(for 10us) -> 600kHz(for 90us) -> 400kHz(for 10us…
