Hi,
I hope you find a solution for managing the shutdown of negative rail.
I will close the thread for now, but feel free to re-open it if you have any further questions
Thanks
-Arief
Part Number: LMZM33606 Other Parts Discussed in Thread: LMZM33604 , LM5141 , LM5117 , ABS hi sir
1.Could I use the LMZM33606 to the power stage? vin 24v/ vout -12v/5A
2.However, LMZM33606 only provides 3A output current while it uses as inverting topology…
Part Number: LMZM33606 Other Parts Discussed in Thread: TEST Hi Team,
we are using LMZM33606RLXR in our board
Project: Test Equipment
Module 1: 30V to 5V (Default 4.5V, in parallel resistance concept we will achieve 5V and 5.5V)
Module 2: 30V to 12V (Default…
Part Number: LMZM33606
POWER SUPPLY_240621_1500.pdf
Hi,
I have a new board which takes 24V input and generates +15V, -15V and +5V output voltages.
I was trying to check the performance and I noticed significant ripple noise on the +15V output. +5V…
Part Number: LMZM33606 Hi,
I'm using 30V to 5V conversion with LMZM33606.
I used SS pin connected to three different option.
Option 1: 5mSec,
Option 2: 11mSec and
Option 3: 16.5mSec.
when I select the capacitor to achieve…
Hi Steve,
These power modules are mostly used in industrial applications but can be used in auto manufacturers as well. As such I would suggest also planning on using alternative devices such as converters and controllers due to the manufacturing constraints…
Part Number: LMZM33606 I have purchased the EVM of the above subject and notice a discrepancy in the demo board vs the datasheet with respect to connecting the sync pin for auto mode operation. The EVM connects this to PGND and the datasheet says to connect…
Part Number: LMZM33606 Hi,
we have a question regarding 7.3.13 in the datasheet - what if an external ramp signal or external capacitor is being used to extend the softstart time, is there a maximum soft start time (tss max) defined?
Regards
Andreas