Hi Aries,
The sole LaunchPad supported for this device family is the LP-CC2651P3, so examples are only provided for the CC2651P3 device. Please see the Running Software Examples on the CC13x1x or CC26x1x module of the Z-Stack Migration Guide for porting…
Hi Jan,
Good Day. Please see below the response of our customer to your reply. Thank you very much.
I'm using CCS 12.1 SimpleLink CC13xx CC26xx SDK - 6.30.10.03 (Offline) Sysconfig 1.14.0
Note: SDK 6.4 have errors in compilation (warning if not…
Hi Mike,
Right from the start I can see a couple of issues. The CC2350 RF design isn't going to be optimal for the CC2651P3. In this case the CC2651P3 LaunchPad should be used as the basis for your design https://www.ti.com/tool/LP-CC2651P3
You can…
TI no longer invests in non-secure Zigbee solutions. You could obtain a LP-CC2651P3 and further evaluate whether you're able to communicate with the legacy Zigbee device using TI 15.4-Stack as part of the SIMPLELINK-CC13XX-CC26XX-SDK.
Regards, Ryan
Hello Ddnr,
Start with the host_test example which demonstrates the NPI. The BLE5-Stack User's Guide has details on the NPI layer whereas the BLE5-Stack Migration Guide contains instructions for porting LP-CC2651P3 examples to the CC2651R3 device .…
Hi Ryan,
I am testing rfDiagnostics on my LP-CC2651P3. On the board, I removed C16 and placed a 15pF cap at C15 to use the U.FL connector. I loaded the rfDiagnostics project (did not make any config or code changes). I entered the following commands…
Christoph,
If I understood correctly all the test scenarios described above, it gives me the impression the connection between the two boards is not reliable or is broken in some way. To verify this, you could attach a spectrum analyzer to the output…
Hi Ashok,
If you are interested in a BLE device, then I would suggest looking into the following parts:
1. CC2652R7 - EVM: LP-CC2652R7
2. CC2652R - EVM: LAUNCHXL-CC26X2R1
3. CC2642R - EVM: LAUNCHXL-CC26X2R1
4. CC2651R3
5. CC2651P3 - EVM: LP…
Part Number: CC2651P3 Other Parts Discussed in Thread: SYSCONFIG , SYSBIOS , CC2652P7 , CC2652R , LP-CC2652R7
Tool/software:
Currently, I am developing the SimpleLink CC2651P3 LaunchPad and attempting to implement OTA following the CC13XX CC26XX SimpleLink…
