Part Number: LP2953 Good day Colleagues,
There is a mistake in the datasheet about the LP2953A for pins 10 and 11.
Package picture says pin 10 is COMPOUT and 11 is COMPIN, but table says 10 is COMPIN and 11 is COMPOUT.
Could you tell me, what is a…
Part Number: LP2953 Hello, I would like to get some information about the LP2953 device, and more precisely about the Error Amplifier. Could you, please, give me the Error Amplifier specifications (open loop gain, unity gain bandwidth, phase margin, input…
Other Parts Discussed in Thread: LP2953 HI
I would like to check if there are ang significant difference in LP2953 and LP2953A?
Are they based on the same die?
INg
Part Number: LP2953 Hello everybody,
i want to use the LP2953 as a voltage source of 1.5V to supply a micro-controller core. So i will use the following reference schematic of the datasheet:
Unfortunately, there are some more pins on the IC which are…
Other Parts Discussed in Thread: LM9070 , LM9071 , LP2957A , LP2957 , LP2952-N , LP2953 How do I search for LDOs that support significant negative voltages like LM9070 with -26V
Part Number: LP2953QML-SP Other Parts Discussed in Thread: LP2953 , What is the output impedance of LP2953? and How to measure the output impedance of LP2953?
Other Parts Discussed in Thread: LP2953 , LP2951-N , LP2951 I'm looking for a pspice model of voltage regulator LP2953. I suppose it's difficult to find, so... Anyone can provide me with a reliable home made model or any advice to create a simplified one…
Other Parts Discussed in Thread: LP2953 Quick question regarding the datasheet for the LP2953. How do you know which pin out to use? I'm working with the LP2953 and there are two different pinouts in the datasheet. I'm not seeing how you differentiate…
So I've gotten a scope and probed around the circuit quite a bit. After spending more time on this it seems like there has to be oscillations in a circuit using this chip because you're battery voltage feed back will hit 1.23V and when you turn the…
Other Parts Discussed in Thread: LM5160 , LP2952-N , LP2953 In addition to my previous question I would like to know if TI has an LDO which meets the same requirements.
You can find the question here:
https://e2e.ti.com/support/power-management/f/196/t/…