Search tips
Showing 26 results View by: Thread Post Sort by
    Answered

  • LP2981: Details of tape dimensions

    Resolved
    Part Number: LP2981 Hi team, Customer wants to understand the length between sprocket holes as below. Are there any data? Regards, Noriyuki Takahashi
    • Resolved
    • Answered

  • LP2981: current limit and thermal shutdown

    Resolved
    Part Number: LP2981 Hi team I understand that LP2981 has current limit function and thermal shutdown, but not sure when these would work. Could you tell the specific value when the current limit & thermal shutdown would operate? Regards, Noriyuki…
    • Resolved

  • LP2981: FAB Process details

    TI Thinks Resolved
    Part Number: LP2981 Hi Team, Customer wants to understand more on the fabrication process used for development of this LP2981IM5X-3.6/NOPB device. Can you please help on that .
    • Answered

  • LP2981: Placing a TVS diode between pin 4 (NC) and pin 5 (OUT)

    Resolved
    Part Number: LP2981 Other Parts Discussed in Thread: TPS7A24 Hi team, for certification reasons, customer had to place a TVS diode between pin 4 and 5 of LP2981. This was necessary for passing EFT test. Which type of issues can be expected by putting a…
    • Resolved
    • Answered

  • LP2981: To know the concern of connect the LP2891 pin4 (NC) to ground

    Resolved
    Part Number: LP2981 Hi Expert, The engineer already connected the LP2891 pin4 (NC) to ground in the design. May we know the concern and why the datasheet defined the Pin 4 (NC) must be left open? Best regards, Eric Lai Field Application Engineer Texas…
    • Resolved
    • Answered

  • LP2981: LP2981

    Resolved
    Part Number: LP2981 Hello, if i dont want to use on/off pin and Vin voltage is 12 Volt, Can i tie ON/OFF pin to VIN ? Thanks.
    • Resolved

  • LP2981: LP2981-33DBVR

    TI Thinks Resolved
    Part Number: LP2981 Could you suggest the component replace of ON Semiconductor NCP551SN33T1G? Thanks!

  • LP2981A: To know the concern of connect the LP2891 pin4 (NC) to 3.3V

    TI Thinks Resolved
    Part Number: LP2981A HI: https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/998768/lp2981-to-know-the-concern-of-connect-the-lp2891-pin4-nc-to-ground/3694604 The LDO LP2981A-50DBVR of TI and pin 4 are NC. If the…
    • Answered

  • LP2981: suplying voltage regulator with 3,3V on output pin

    Resolved
    Part Number: LP2981 I have a LP2981-33DBVR to generate 3,3V out of 12V of a switching power supply. For programming the board the PCB only can be supplied with 3,3V (12V not possible). So 3,3V is connected directly to the output pin of the LP2981-33DBVR…
    • Resolved

  • LP2981: Output voltage temperature coefficient

    Part Number: LP2981 Hi to everyone, I'm currently writing my Master's dissertation about a magnetometer that uses two LP2981 as linear regulators on it's power source. It's all working very well, but I do need to include a Temperature Drift…

Didn't find what you are looking for? Post a new question.