Part Number: LP2985-N FCT lock function test failure was observed on Etron. The failed item was locked to LP2985-33DBVR from TI with over-limit test voltage. Test limit: 0 –0.9 V Actual measured value: 1.73 V ABA test result: No available good PCB for…
Part Number: LP2985-N Hello,
We are currently reviewing inventory of the LP2985-N associated with our internal part number 1044-2985-50 and need to determine whether the components in our inventory were manufactured using the legacy process or the redesigned…
Part Number: LP2985 Tool/software: Kindly provide below listed parts life cycle status. How long expect to continue manufacturing it?
Sr No
Description
Make
MPN
1
IC LM78L12ACM fixed voltage regulator 100mA SO8
Texas Instrument…
Part Number: LP2985 Hi,
rise up time is to slow, one part of our board is not working. I changed Bypass capacitor to 470 pF. Emission is in my measurement better then with 10 nF.
Is 470 pF possible for bypass and useable? What do I have to check more…
Part Number: LP2985
Im reaching out to request clarification on the packaging differences between the following parts:
LP2985AIM5-3.3/NOPB
LP2985AIM5x-3.3/NOPB
Could you please confirm if the “x” designation indicates a different packing option…
Part Number: LP2985-N Is the LP2985IMS5-3.3/NOM3 the new chip or the legacy?
Table 8.1 doesnt explain what NOM3 means, M3 means new, NOPB is leadfree, is NOM3 -> Not M3, or No lead and M3. The 3.3V option is also the only part number that uses this…
Part Number: LP2985
Tool/software:
Hello, I'm using the LP2985-50DBVR in one of my designs to achieve a 5V fixed output, however when there's no load connected before applying an i/p voltage , I am seeing 10V. When I attach the load before applying…
Part Number: LP2985 Hello technical team
We have been purchasing the following TI parts from authorized distributors. Although the manufacturer part numbers are correct, we noticed differences in the part markings between parts from different lots…
Part Number: LP2985 Tool/software: Hello,
In the datasheet of LP2985-33DBVR, In fig 6-34, the ground pin current is shown. Just wanted to understand what is the impact of high ground pin current?
Thanks
Madhurani