Part Number: LP2985A Other Parts Discussed in Thread: PCM4104 , LP2985 Hello support team,
in our application we use LP2985A-50 as power supply regulator for the analog section of an audio DAC ( PCM4104 ). On some board of our mass production we encountered…
Part Number: LP2985 Other Parts Discussed in Thread: , , TPS7A24
Hi team
Could you tell the differences of electrical characteristics between LP2985 and LP2985A and LP2985-N?
I know that LP2985-N was developed at NS and LP2985 and LP2985A are the second…
Part Number: LP2985A
Hi
My customer is looking for an alternative to LP2985AIM5X-3.3/NOPB Due to delivery problems, alternatives are currently being examined and they released the following designations: LP2985A-33DBVR LP2985A-33DBVT LP2985AIM5-3.
There…
Part Number: LP2985A Other Parts Discussed in Thread: LP2985-N What is the difference between LP2985AIM5-... and LP2985A-... ? Both are available and seem to be exactly the same product (although there are two different datasheets). What should I specify…
Part Number: ISO3086T Other Parts Discussed in Thread: TPS7A24 , LP2985A , Hi team,
My customer is considering to use our device and has 1 question.
In the EVM, LP2985A-50DBVR is used as a power source for the secondary side. But if you look up the product…
Part Number: LP2985A Other Parts Discussed in Thread: LP2985 Hi
customer need to know what's the min OTP value of LP2985AIM5-3.3NOPB and LP2985A-33DBVR?
thanks.
Part Number: LP2985A Hi all,
I'm doing reliability analysis (according to Telcordia SR332 Issue 3 method) for a design with many Texas Instruments components.
Fit/MTBF values given by TI follow another standard and are not comparable to Telcordia…
Part Number: LP2985A Hello,
I need some information’s about some components from you which are used in our system.
The part numbers are:
LP2985AIM5-3.3
MCP6004-I/ST
Do you have the mean time to failure (MTTF) of those components.
If so, than…
Part Number: LP2985A Other Parts Discussed in Thread: TLV733P , TLV755P Hi There,
In our board, after program one particular LED should blink. (Means that board got programmed correctly).
In the below circuit at location IC U4 if we use Microchip brand…