Part Number: LP38500-ADJ Hello,
My customer has a few questions about the LP38500SDX-ADJ/NOPB.
1. According to the datasheet, Vadj's accuracy is ±3.5% for STD.
Will the VOUT min/max be different for each device even in the same Reel or the same…
Part Number: LP38500-ADJ Hi,
What's the operating temperature range (C) for LP38500ASD-ADJ/NOPB? I find that this material and several other materials don't list the temp range. Could you please provide the temp info? Thanks.
Best Regards,
Tess…
Other Parts Discussed in Thread: LP38500-ADJ Hi,
I am using the LDO, LP38500-adj, WSON package. The following the link to its datasheet.
http://www.ti.com/lit/ds/symlink/lp38500-adj.pdf
The land pattern of the WSON package (NGS008C), shows the…
Other Parts Discussed in Thread: LP38500-ADJ Support,
We have a customer using part number LP38500-ADJ. It is powered by a 5.0V rail and output is set to 3.3V. The output currnet is approximately 500mA. After operating properly for several hours the…
Chad,
Unfortunately, we don't have p2p device that can meet your requirements. The closest option is LP38500-ADJ, but it's not p2p and will not meet the Vin max.
LP38690-ADJ
LP38500-ADJ
AEC Q100
NO
NO
Output Options
Adjustable…
Part Number: LP38502-ADJ Hi,
I'm trying to drive the enable pin of an LP38502 directly from part number APX809-29SAG-7 and I find that the supervisor circuit is unable to assert a new logic level (stays low forever after powerup) though it seems to…
Hi All, Would you mind if we ask LP38500? <Question> Our cusotmer will use LP38500ASDX-ADJ/NOPB. Our cusotmer will design the board with LP38500ASDX-ADJ/NOPB following conditon; -Condition- Copper foil：20～25um GND plane：3 layers( there are three GND plane…
Hi,
I've attached the 2013 User's Guide for power products. Starting on page 53 you will find a selection of PWM controllers. many of these teh frequency can be varied according to external criteria.
As an example if you use a UC3842 it is a simple…
Gary,
Most any of our power controllers with dual output capability will provide the control. See attached document starting at page 50 with the dual output controllers on page 53 and 54 and choose what features you want.
Regards,
John
