• 

  Jeff Xie

  • 23 days ago
  • Power management
  • Power management forum

  LP38692: Dropout voltage at 0.5V

  • Resolved

  Part Number: LP38692 Hi expert, Customer has two questions: 1. What is the Dropout voltage (Vdo
• 

  Takashi Kamijo

  • 2 months ago
  • Power management
  • Power management forum

  RE: LP38692: Reliability data for LP38692MP-2.5/NOPB

  Hi Jason Song-san Thank you for providing the reliability data. best regards.
• 

  Nicholas Ipri1

  • 4 months ago
  • Power management
  • Power management forum

  LP38692: Logic Control of the EN Input

  TI Thinks Resolved

  Part Number: LP38692 The LP38692 will be used to provide Vdd to my system including the microcontroller (MCU). The MCU will have a GPIO, configured as output, connected to the EN pin of the 38692 to allow the MCU to power off the regulator / system...
• 

  Hitesh Kumar Chandrakar

  • 11 months ago
  • Power management
  • Power management forum

  LP38692: selection of output capacitance in LDO regulators

  TI Thinks Resolved

  Part Number: LP38692 I am using the LP38692 for regulating the voltage from 9V to 5V..... Could you please suggest me the quantitative procedure for the selection of the output and input capacitors......
• 

  chethan md

  • over 1 year ago
  • Power management
  • Power management forum

  LP38692: Looking for a footprint compatible LDO which can accept 12V Vin

  • Resolved

  Part Number: LP38692 Hi, I have used LP38692SD-ADJ/NOPB in one of my board which can take Vin up
• 

  Hirotaka Matsumoto

  • over 2 years ago
  • Power management
  • Power management forum

  LP38692: VEN's Absolute Maximum Ratings

  • Resolved

  Part Number: LP38692 Hi all Would you mind if we ask LP38692 ? How much is VEN's Absolute Maximum
• 

  Masanori Tachibana

  • 9 months ago
  • Power management
  • Power management forum

  TPS735: About fast start-up LDOs

  • Resolved

  . [LDO 1] --> TPS735, LP38693 [LDO 2] --> LP38692 Is there any other good product you can suggest
• 

  ajayt

  • over 1 year ago
  • Power management
  • Power management forum

  LP38692-ADJ: gerbers for eval board

  TI Thinks Resolved

  Part Number: LP38692-ADJ Hi Team . Could you send me Gerbers and schematic for AN-1757 LP38693SD-ADJ Evaluation Board please, because they are missing from your webpage?
• 

  Gerold Dhanabalan - Online Design Tools

  • over 2 years ago
  • Simulation, hardware & system design tools
  • Simulation, hardware & system design tools forum

  RE: WEBENCH® Tools: AC/DC Bipolar Supply +/- 5VDC & a 3.3VDC Supply

  Hi Wesley As I mentioned earlier, you can use the LP38692 provided the input is lower, such that the drop across the LDO is not high. I was able to create the design using LP38692 in WEBENCH for a 4.3V Vin, 3,3V Vout @ 1A webench.ti.com/.../SDP...
• 

  Mark Sellers

  • over 2 years ago
  • Power management
  • Power management forum

  RE: LP38692: Heat dissipation for 5V output, 300mA and 6.5Vin

  Hi FAX, The theta JA of this device is only 50.6 C/W for the WSON package. If you are only dissipating 0.5W you should only expect a junction temperature rise of ~25C from the ambient temperature. As long as you pay attention to heat sinking in your...

Didn't find what you are looking for? Post a new question.

• Ask a new question