The device listed on your schematic has both Vout1 and Vout2 set for 3.3V, so the input voltage should be higher than 3.3V to keep the LDO out of dropout. The device will operate for Vin>2V, but it will not meet the EC Table specifications if the LDO…
Part Number: LP3996 Other Parts Discussed in Thread: TLV710-Q1 , , TLV751 Hi,
Could you please recommend an alternative device for LP3996 and TLV710-Q1 that has a lower Iq? I can't find any other device than those devices I have mentioned. My required output…
Part Number: LP3996-Q1
Hi,
Could you provide required ESR spec for LP3996-Q1?
In the datasheet, there is just min, max.
Please provide the ESR including frequency range.
Thanks.
Part Number: LP3996-Q1 I would like to confirm output voltage value of LP3996-Q1.
In the datasheet, this IC has the programable output voltage setting.
If we request 1.8V/1.8V, can you provide it?
And about the voltage setting program, how do you use…
Part Number: LP3996 A few questions regarding the LP3996 dual regulator:
1. What is the internal reference voltage? Seems like it must be < 1.0V.
2. What is the value and (probably sloppy) tolerance of the internal resistor biasing the Cbypass pin…
Other Parts Discussed in Thread: LP3996 Hi, so I am interested in using the LP3996, which is a dual output LDO regulator. I am wondering about how to do reverse battery protection though, as the datasheet doesn't say anything about that.
The device…
Hi Kelly,
We do not have an LDO that will provide all three outputs in a single device. We do have multiple dual and single output LDOs that may be able to fit your requirements depending on your Vin, Iout, and PCB space requirements. Please provide…
