Part Number: LP5012EVM Other Parts Discussed in Thread: USB2ANY I have tried the combination of all addresses in the board, with correspondent changes of addresses in the GUI. I also tried address 0x14. I tried external 5V supply and internal 3.3V supply…
Part Number: LP5012EVM Other Parts Discussed in Thread: LP5012 , USB2ANY Can you help with the reported issue from my customer trying to use the LP5012EVM and GUI? Thanks in advance!
We have downloaded the latest version of the LP5012 GUI from TI website…
Part Number: LP5012EVM Other Parts Discussed in Thread: USB2ANY , , MSP430F5529 , LP5012 , LP5024EVM , LP5024 The first time the customer uses the evaluation version, the setup is according to the user manual. The gui software of the official website can be…
Part Number: LP5012EVM Other Parts Discussed in Thread: USB2ANY , MSP430F5529 , LP5012 , LP55231 , LP5569 , LP5813 Hello Expert,
I've seen issues which I2C communication was not work through various e2e threads.
I guess this issue is not resolved.
Our customer…
Part Number: LP5012EVM Other Parts Discussed in Thread: USB2ANY , , LP5012 Trouble talking to board over USB2ANY.
1) I have updated the GUI software for the LP5012EVM.
2) I have updated the firmware for the USB2ANY.
3) I have connected the cable in correct…
Part Number: LP5012EVM Other Parts Discussed in Thread: USB2ANY Dear Team
Good day!
Our customer loading the LP50EVM Gui and everything loads successfully, but when I run the program I get an error stating "Failed to Create Data Directory, NW.js cannot…
Part Number: LP5012EVM Other Parts Discussed in Thread: USB2ANY In order to communicate with the LP5012EVM board I need to set the I2C address in LP50 to 0x14.
The "Latest Version" (v1.1.1 (2c26f1)) will not accept this as a valid address "stating it…
Part Number: LP5012EVM Other Parts Discussed in Thread: LP5012 When selecting a colour on the colour wheel in the LP50 software, red and blue on the LEDs on the development board are switched. Did I do anything wrong?
Part Number: LP5012EVM Other Parts Discussed in Thread: LP5012 Hi Expert,
My customer has an issue about unstable Duty at low brightness setting.(with LP5012)
Left side in the following waveform is set Brightness value to 64. If they set over 64, it is…
Part Number: LP5012EVM Other Parts Discussed in Thread: LP5012 Even I set the registers as below, the LED sink current stays @ 20mA and never goes up to 35mA.
40 1E 0F FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 00
I supplied 3.6V for…