Part Number: LP5024EVM Other Parts Discussed in Thread: USB2ANY Hi I just bought LP5024EVM with USB2ANY. but It is not working. Can anybody help me ?
I installed LP50 GUI soft on my Toshiba Lap top computer. I connected USB for USB2ANY, LP5024EVM with…
Part Number: LP5024EVM Other Parts Discussed in Thread: USB2ANY Hi
I just bought LP5024EVM engeering development kit. I installed LP50 soft from TI.com on my TOSHIBA Rap top computer with Window 10 HOME. i connected USB2ANY and LP5024EVM by 10pin ribbon…
Hi Kevin,
Please refer the comments below:
1. Please make sure the MCU of the pre-stage has pull-up capability, otherwise please pull up the SDA and SCL pins externally. You can refer the schematic of LP5024EVM .
2. Although I am not sure the spec of the…
Hi Satoshi,
There is not rise time limitation for input voltage to Vcc pin.
And you can connect Vcc with EN, it can work.
You can take LP5024EVM as reference:
LP5024EVM User's Guide (ti.com)
Thanks!
Part Number: LP5024EVM Other Parts Discussed in Thread: USB2ANY , LP5024 I have a brand new LP5024EVM. I followed the directions; GUI software is installed, but at upper right corner of screen it shows "USB2Any not connected". The USB2Any device…
Hi Betty,
Nice to hear you, the GUI for LP5012EVM has some problem, have you checked the I2C address?
If it is possible, I can provide the example code for LP5012 based on MSP430F5529.
Or I can give you the set-up guidance for LP5012.
Finally, could you…
Part Number: USB2ANY Other Parts Discussed in Thread: LP5024EVM , , LP5024 Hello,
My customer wants to write registers directly through I2C with USB2ANY to LP5024EVM because LP50GUI can't change the lighting pattern dynamically as following E2E post.…
Part Number: LP5024 I have got LP5024 evm board.
I download LP50EVM GUI (Rev. A) from
http://www.ti.com/tool/LP5024EVM#technicaldocuments
But I still cannot control the evm board.
Addr0 and Addr1 all connect to ground with jumper.
So the i2c address is…
Hi, Nanjie,
Thanks for reaching us.
Sorry we don't have avaliable demo boards at hand now since this is quite popular.
You can request for the EVM for reference.
LP5024 and LP5018 support 29kHz. And LP5024EVM has led ring and GUI.
Please take…