Part Number: MSP430F5418A Other Parts Discussed in Thread: LP5036 At the end, I program the I2c without the library functions - and everything seems to work fine - though it sometimes gets "stuck".
This is for a 24/7 device - really quite simple…
Hi Monet,
thanks again for your answer! Okay the LP5036 is not suited for this application.
I want to drive 3 LEDs (2.8 - 3.1V each) in series to match my supply voltage of 12V. If possible 20 Channels with a current range of 20 - 30mA would be perfekt…
Part Number: LP5036 Hi there,
I have a few questions about LP5036's temperature rating.
(1)What does the Op Temp here refer to? Junction temp or ambient temp?
(2)The maximum junction temperature of LP5036 is 125 degree, then why is the thermal shutdown…
Yes. The orange color is tricky - but yellow is basically impossible to achieve.
For orange - red-255, Green-40, Blue-0
I also learned that if I use the USCI_B_I2C_masterSendMultiByte... WithTimeout functions - I must check the returned value to determine…
Part Number: LP5036 Other Parts Discussed in Thread: LP5030 Hello,
My questions are in regards to the chip enable (pin 43) of the LP5030/6.
When disabled via pin 43, does the I2C bus still work?
When disabled via pin 43, is the firmware still running…
Part Number: LP5036 Dear Team,
LP5036 according to datasheet requires a minimal time of the falling edge of SCL and SDA of 15ns -> after some research the finding was that mmight only be valid for frequencies > 100Khz (fast-mode). Customers only…
Hi Bruno,
Could you please provide more information?
what about the input/output voltage
how much channels do you need?
the range of output current
...
Best Regard
Monet Xu
Part Number: LM5036 Other Parts Discussed in Thread: LP5036 Dear team,
Do we have LP5036 LED driver/code for Android/Linux ?
If yes, could you provide the LP5036 LED driver/code for Android/Linux to us?
Many Thanks
Jimmy
