Part Number: LP5864 Tool/software: Hi teams:
The problem now is that there are two ways to define the slave address of LP5864: independent and broadcast. However, there is now a problem where I suspect that the slave address of my other I2C peripheral…
Part Number: LP5864 Hello,
I understand that the LP5864 uses multiplexing to drive the different channels. But I don't see it specified in the datasheet what the frequency of this switching is and how much on-time an led gets during one full cycle.…
Part Number: LP5864 Tool/software: Hello,
the datasheet of the LED matrix driver defines for the parameters "Device to device current error" and "Channel to channel current error" two equations.
The content of these equations is not described at the…
Part Number: LP5864 Hi,
I have the following questions:
1- Is VIO_EN active high?
2- Can VSYNC be left floating, when exclusively MODE1 is used?
Thanks in advance.
Part Number: LP5864 Tool/software: I design a circuit that drives LED with LP5864.
There are 46 LEDs in my circuit.
LP5864 can drive 4 scan lines with 18 current sinks.
But I want to drive 3 scan lines with 16 current sinks.
so, I can drive 48…
Part Number: LP5864 Tool/software: In datasheet, the mode selection (Data_Ref_Mode field in Dev_initial register) is not detailed (value vs mode). Could you help me?
At power on, Dev_initial default value is 5Eh. Does this mean that mode 3 is selected…
Part Number: LP5864 Hello,
I'm currently trying to light up a LED (L0-CS0) (150060AS75000 from wurth) with the LP5864 to validate a circuit. But i currently get no results.
I did try to find some example code for C, but could not find any.
I'm trying…
Part Number: LP5864 Other Parts Discussed in Thread: TCA8418E Hello,
in a few circuits I used an AS1115 for LED control and key readback for mechanical switches. In future we do not want to use this device anymore and one of my colleagues suggested…
Part Number: LP5864 Hello,
I'm using the LP5864 in a custom board and I have some question regarding how to handle the software of the driver.
In fact in the register maps it's mentioned " Dot Lx- CSx onoff" the CSx are clearly the channels but what…
Part Number: LP5864 Hello, we prepared a LED- illumination board with the LP5864 and 4x 5 RGB- LEDs (4x 15 lines) and want to drive the LEDs via 8bit PWM. We have access to the register area via I2C e.g. read "Dev_initial" = 5Eh.
Can you give me an…
