Part Number: LP8733 Hi team,
Could you help me to check if my understanding of LP873345 soft-start is correct? From datasheet p. 23-25,
1. Both DC-DC and LDO have soft-start 2. In case of DC-DC during the soft-start, the inrush current limit is working…
Part Number: LP8733 Hi team,
My customer will use LP87334D for powering AM243x and he is asking question.
Regarding overload protection, the datasheet states "The host processor clears the interrupt by writing 1 to the BUCKx_SC_INT. Upon clearing the…
Part Number: LP8733 Other Parts Discussed in Thread: AM6442 Hi team,
My customer will use LP873364 for powering AM6442 and its OTP setting of PGOOD_MODE is Gated Mode. While, they would like to use Continuous Mode.
Just for double check, is it possible…
Part Number: LP8733 Dear all
right now i am reviewing of LDO with i2c for new design
i dont find what is difference between LP873345RHDR and LP873347RHDR and LP873344RFDRQ1 at data sheet.
I just know that Q1 is for AEC-Q100 .
So could you tell me more…
Part Number: LP8733 Hi team,
Regarding SCL and SDA input voltage, 6.3 Recommended Operating Conditions says as below. Voltage on I2C interface, Standard (100 kHz), Fast (400kHz), Fast+ (1 MHz), and High-Speed (3.4 MHz) Modes : 1.95V Voltage on I2C interface…
Part Number: LP8733 Other Parts Discussed in Thread: AM2431 I may have two AM2431 devices on one PCB - Can I use one LP8733 to power both AM2431 devices
No DDR, support required
Part Number: LP8733 Other Parts Discussed in Thread: AWR1843 Immediately, I have two questions.
1. Default values of SW_B0 and SW_B1 of LP873347RHDT When using this IC as a switching regulator, what voltage will come out if no program is written? By the…
Part Number: LP8733 Other Parts Discussed in Thread: AWR1843 , AWR1843BOOST , LP87702 １，LP873347RHDT of AWR1843BUSTOS About how to output 1.8V and 1.24V like U4
２，Designed with reference to AWR1843 BUSTOS I designed the board but it doesn't work properl…
