Part Number: LP87524-Q1 Tool/software: Hi
I want to use two LP875241SRNFRQ1 in my design but i dont know how to control the I2C address for second PMICs? since no pin is there for address straps. And since we are using it to maintain the power on…
Part Number: LP87524-Q1 Hi engineers:
about the LP87524-Q1:
How do I understand "BUCKx_FLOOR_VOUT" when the floor state is used.
what is difference between the BUCKx_FLOOR_VOUT and BUCKx_VOUT ？
Thanks.
Johnsin Tao
Part Number: LP87524-Q1 Hi,
My customer decided to use LP87524-Q1 for their new product, but he has a question about this chip. There are 4 power output channels of LP87524-Q1, but why there are only three EN pins? And how to control 4 converters independently…
Part Number: LP87524-Q1 Hi team,
For 2nd filter in radar application, I don't think 2nd filter is mandatory when radar intermediate frequency is low enough from DCDC switching frequency and I think in/output caps is sufficient in that case. Do you agree…
Part Number: LP87524-Q1 Is it possible to operate LP87524 with external frequency of 800KHz? As per datasheet iis is recommended to operate with frequency from 1MHz to 24MHz. In case yes, what will the effect on performance
Part Number: LP87524-Q1 Other Parts Discussed in Thread: UNIFLASH , IWR6843 hi team,
our customer Kadex is currently working on a radar project were they have build a custom board with PMIC LP87524-Q1 on it. Unfortunately they are having some issues…
Part Number: LP87524-Q1 Other Parts Discussed in Thread: AWR2243
1，About LP87524-Q1LP87524-Q1‘s OTP files, Can LP87524-Q1 directly output the first off voltage?
If IIC is not configured, and the EN pin is pulled high. Can LP87524-Q1 directly…
Part Number: LP87524-Q1 Other Parts Discussed in Thread: LP8758 , LP8752-Q1 , TPS65266 , TPS563900 , TPS65400 , TPS65265 Hi Sir,
My customer is looking for a 4-ch PMIC device and it could support the output power including 0.9V/2~3A, 3.3V/3A, 1.5V/1…
Part Number: LP87524-Q1 Can LP87524-Q1 not connect to I2C?
If it does not connect, can Control Registers be shipped in a hard-coded way when it leaves the factory?
Part Number: LP87524-Q1 Hi team,
If I apply 3.3V on NRST while power is not supplied to the device, is there any issue?
From absolute max rating, there should not be destructive concern, but I concern if there is any leakage path to the other node…
