Part Number: LP8869C-Q1 In the board which we used the LP8869C-Q1 has the switching noise in the input (VIN) with respect to the Brightness PWM control frequency and duty cycle except the 0%,100% duty cycle. The Noise is in the range of approximately…
Part Number: LP8869C-Q1
LP8869CQPWPRQ1 - Driver IC Schematic review
Hi Team,
We are using LP8869CQPWPRQ1 this Driver IC in our two wheeler cluster design for TFT Backlight Driving Purpose.
Could you please review the schematic section and…
Part Number: LP8869C-Q1 Hello,
in LP8869C-Q1 datasheet, we cannot find pacakge information.
https://www.ti.com/lit/ds/symlink/lp8869-q1.pdf
where we can find pacakge information, pin pitch, etc..
Part Number: LP8867-Q1 Other Parts Discussed in Thread: LP8869C-Q1 , Hi Expert,
Our customer wants to replace LP8869C-Q1 with LP8867-q1. If we don't use
Power-Line FET Control and
Automatic LED Current Reduction With External Temperature Sensor…
Part Number: LP8869C-Q1 Other Parts Discussed in Thread: LP8867-Q1 Hi Expert,
Could you please tell why the RC is needed in " LP8867-Q1 Evaluation Module User's Guide" ? Thanks.
BR,
Elec Cheng
Part Number: LP8869C-Q1 For LP8869C-Q1, FAULT Pin is connected to 5v pullup instead of connecting to VDDIO. While measuring the voltage at Fault pin it is showing only 4.6V instead of 5V. We have used 10k Resister value for pullup, What is the Reason…
Part Number: LP8869C-Q1 Hi team
I would like to ask that what is the Vsat value of LP8869CQ1 like this below from TPS71133Q1 datasheet:
Is that also 0.5V typical and 0.9V maximum? Thank you.
Part Number: LP8869-Q1 Other Parts Discussed in Thread: LP8869C-Q1 Tool/software: Hi Team,
What is the initial VOUT before enable built'?
We don't see the voltage before establishing the EN.
Regards,
Roy
Part Number: LP8869-Q1 Other Parts Discussed in Thread: LP8869C-Q1 Hi team,
For below devices, which land pattern in datasheet should be used -
LP8869-Q1: page 40 or page 42?
LP8869C-Q1: page 38 or page 40?
