Part Number: LVBLDCMTR Hi,
we are looking for some PMSM Motors to allow students to design their own nonlinear control algorithms using a 24V power converter. Since most 24V machines are servo motors and therefore typically dont saturate i wondered if…
Part Number: BOOSTXL-DRV8320RS Other Parts Discussed in Thread: MOTORWARE , LVBLDCMTR Tool/software: Need Help Running a Sensorless BLDC Compressor Motor with DRV8320RS and F280049C
Hi everyone,
I’m using a F280049C LaunchPad with the BOOSTXL-D…
Part Number: LVBLDCMTR Other Parts Discussed in Thread: LVSERVOMTR , 2MTR-DYNO Dear TI
I ordered five LVDCMTR products new days ago. then it is a motor for Sensorless Application!(non hall sensor
cable and i don't find addition information product in telcointercon…
Part Number: LVBLDCMTR Other Parts Discussed in Thread: LAUNCHXL-F28027F , BOOSTXL-DRV8301 , I just got started with a LAUNCHXL-F28027F and a BOOSTXL-DRV8301 and was following the 5b project motor identification. One of the parameters was out of range after…
Hi Jason,
Yes, the values that I have in the above parameters are within the specified range.
I have questions on USER_M1_PWM_FREQ_kHz parameter:
- Is there a specific value for USER_M1_PWM_FREQ_kHz parameter? The default value is 15. I set mine to 40.…
Hi Jasraj,
OK, the HW connections should be correct then.
What motor parameters are you using in 'user_mtr1.h' file? The LVBLDCMTR should correspond to one of the two defines below I believe:
#define USER_MOTOR1 Anaheim_BLY172S_24V
#define USER_MOTOR1…
Hi Alicia,
Good Day.
Thanks for your reply that DRV8301-69M-KIT is suitable for my application & LVBLDCMTR does not come with it. Few more clarifications: 1) Do I need TMDXCNCD28054MISO (sold separately) - what is its purpose? 2) Do I need TMDSCNCD28027F…
Part Number: LAUNCHXL-F280025C Other Parts Discussed in Thread: BOOSTXL-DRV8323RS , , LVBLDCMTR , MOTORWARE Hi champs,
I am studying universal_motor_lab by using EVM LAUNCHXL-F280025C and BOOSTXL-DRV8323RS. I modified the hardware according to Motor Control…
Peter,
Thanks for posting on the MD forum!
The parameters for Instaspin are listed on the product page here: http://www.ti.com/tool/LVBLDCMTR
Regards,
-Adam
