Part Number: LVSERVOMTR Dear team:
I have seen the specification of Teknic LVSERVOMTR, but there are still some pins whose signal sources are not very clear.
What is "P DRAIN" and "E DRAIN" of pin 1&6? And what is "COMM S-T", "COMM R-S", "COMM T…
Part Number: LAUNCHXL-F28069M Other Parts Discussed in Thread: LVSERVOMTR , Hello, I'm trying to set up a test with the KIT LVSERVOMTR, the LAUNCHXL-F28069M launchpad and the BOOSTXL DRV8305EVM driver. I haven't found the documentation to connect in the…
Part Number: BOOSTXL-DRV8301 Other Parts Discussed in Thread: LVSERVOMTR , DRV8301 Tool/software: Code Composer Studio Hi,
I am confused reading different namings of LVSERVOMTR, 3-ph synchronous permanent magnet servo motor with sinusoidal back EMF…
hi,
when using the 24V/5A power supply while motor is connected to boosterpack, the motor is getting really HOT. when working with either simulink matlab or ccs studio.
What could be the reason for this?
Part Number: LAUNCHXL-F28069M With reference to the use of the motor (Teknic_M2310PLN04K), the cable for the KIT is supplied with two connectors: J4 which is connected to the encoder included in the motor and J10 which is connected to the hall effect…
Part Number: LVSERVOMTR Hi! I have troubles with understanding the difference between electrical interfaces in the specs of the motor, in particular the difference between (S/E/W) and (P/C/Y), could you please clarify this to me? Thank you!
Ziv,
The hall sensor connector is the one you described.
If the motor is not connected to anything, and your current limit is enough to overcome the static friction of the motor the only impact on performance is how quickly the motor can accelerate…
Hi Chris,
I reviewed a previous post to look for some solution.I saw you have said LVSERVOMTR is salient, but I find its Ls-d and Ls-q are the same in user.h . I feel confused. Can you help me?
Thanks.
