Part Number: MCF8329A Other Parts Discussed in Thread: MCT8329A Tool/software: Hello Experts, My customer is evaluating MCT8329A and they will build own PCB board. At same time, customer would like to evaluate MCF8329A by using same PCB board of MCT8329A…
Part Number: MCT8329A Hi,
■Question 1: Loss sync times Loss of sync is one of Motor Lock Detection. When are Loss sync times cleared? For example, when the power is turned on and a command value of a certain rotation speed is input, the motor will rotate…
Part Number: MCT8329A Hi Team,
Customers want to know if other MCUs (such as STM32) can be used to replace MSP430 to control the MCT8329A motor driver chip?
Regards,
Annie
Hello Pierre,
My apologies for issues that you are having with the application. Myself and another engineer tried to download and install cloud agent on M1 and M2 mac books, while on TI network and also off TI network. We did not run into any issues that…
Part Number: MCT8329A Dear person in charge,
What does it mean when the reserved bits 28 and 29 of GD_CONFIG1 are checked?
If the reserved bits 28 and 29 are not checked, GD_CONFID1 = 0x0006807B, but if they are checked, GD_CONFID1 = 0x000680FF. In this…
Part Number: MCT8329A Hi,
Q1.AUTO_HANDOFF
Below is a diagram showing the time and rotation speed since startup.
If "AUTO_HANDOFF" is "Enable", how is the rotation speed at the time of switching determined?
When AUTO_HANDOFF is Disabled…
Part Number: MCT8329A Hello
Can someone let me know the purpose of the following please?
- PIN_CONFIG1.DACOUT_VAR_ADDR
What values can I use here?
Thanks
Ron
Part Number: MCT8329A I am wanting to capture the phase current from the MCT8329A on my custom PCB using an oscilloscope.
I believe that I need to:
Set PIN_CONFIG2.DAC_SOX_ANA_CONFIG to DACOUT
Set PIN_CONFIG1.DACOUT_VAR_ADDR but am not sure which 12-bit…
Part Number: MCT8329A Hi, recently I'm trying to drive the BLDC motor with MCT8329A.
I made a small development board myself and now I'm testing my board.
Since I don't use I2C communication with the IC, I'm driving the motor in default condition…