Part Number: MSP430F233 Hello!
I got a 8Mbit Serial Flash Memory connected to the MSP via SPI. The Flash is used to save measured Data with the Real Time. All values are saved as hexadecimal.
I coded a function to get the Data out of the Flash and send…
Part Number: MSP430F233 Hello!
I hope someone can help me with this issue since it is frustrating me for 1 week counting.
My goal is to establish a working communication between the MSP430 and 2 SPI slaves.
One slave is the DS1390 RTC which needs SPI…
Other Parts Discussed in Thread: MSP-TS430PM64 Windows 10
Code Composer Studio Version: 6.1.1.00022
MSP4330 USB Debug Interface MSP-FETU430IF
I have compiled and linked a load output in HEX then, used "tools" and "Load Memory" to load it.…
Other Parts Discussed in Thread: MSP430F233 , MSP430F5528 We have been using CCS to Compile, Link and program the MSP430F233 on our custom board, using MSP-FET430UIF. Using this setup we have not had any issues.
However, we recently tried to switch to using…
Other Parts Discussed in Thread: MSP430F233
Hi,
I want to sample an analog signal and convert to 12-bit digital data and store it in a external memory @ 1KHz. For this I wanted to use MSP430f233 micro controller. Or is there any better option available…
Other Parts Discussed in Thread: MSP430F233 The Eval board and documentation for the MSP430F233 shows RC on Reset/NMI ... we would like to use reset generator to get 200ms pulse .. will this cause any issues with the FET/Debugger via JTAG or SPI-Wire …
Part Number: MSP430F5529 Other Parts Discussed in Thread: MSP430F233 Tool/software: Code Composer Studio Hi,
I am configuring an MSP430F5529 UART at a DCO of 8 MHz and a baud rate of 115200. I am establishing a serial communication between MSP430F5529…
Chapter 9 of the User's Guide says:
The SVS is implemented in selected MSP430x2xx devices.
None of them is in the G2xx "value line": MSP430AFE221, MSP430AFE231, MSP430AFE233, MSP430AFE253, MSP430F233, MSP430F235, MSP430F2416, MSP430F2417, MSP430F2418…
Other Parts Discussed in Thread: MSP-TS430PM64 , MSP-GANG Configuration: Windows 10---CCS 6.1---MSP-FETU430IF---MSP-TS430PM64---MSP430F233. Removed jumper J7 and voltage was 0.6V.
Just received the PM64, plugged the 14 pin JTAG in, put the F233 chip in…
Other Parts Discussed in Thread: MSP430F233 Compiles C++ program and builds with no errors. Debug loads with no errors. But not all program is loaded into MSP430F233 chip.