Hello, I'm sorry about the late response! I ended up importing an empty project from MSP430ware with the driverlib folder (then copy and pasted my files into the empty project), and then most of the warnings went away. However I'm still getting errors…
Part Number: MSP-GANG Other Parts Discussed in Thread: MSP430FR5962 , MAP-GANG 1.03.01.00 says the RAM size in MSP430FR5962 is 4096 bytes when it is actually 8192 bytes.
It throws error #396 during Open Code File operation.
and error #386 if I try…
Hello Peter,
On one hand it is for the supply voltage range limited from 2.4V - 3.6V >>>> I'm sorry I'm not able to find this specification in table 5-23.
As mentioned before we are planning to use AVCC as ADC reference source (ADC12VRSEL=0000b) so…
Part Number: MSP430FR5962 Other Parts Discussed in Thread: MSP-FET Hello,we use MSP430 in our products, and we are preparing for mass production recently, so we are making mass production tooling.
I used MSP-FET as a code burning tool, but I found several…
Part Number: MSP430FR5962 Hi guys,
i am difficult in understanding the internal and external PWM output on page 6 of the datasheet footnotes 7,8.
The IC lack the PWM module,so i need to generate the PWM by the timer;
Does the internal PWM outputs…
Hello JD,
thanks for the quick response. Indeed it is an custom board, but the RST pin is pulled high with 10k.Experimenting a bit with the LPM3 and LPM3.5 I guess I have found a WA by using LPM3 and ignore the .5 completely.
Best
Christian
To Wei, Tobias, Keith B.,
I was trying a variety of work-arounds/fixes and decided to search my ti directory to find all the different version of the mspfr5962.h file and found a ccs7, ccs740 (same as CCS7), ccs8, and ccs9.10 versions. Tried ccs7 version…
Part Number: MSP430FR5962 Tool/software: Code Composer Studio How do I set up the information memory using code composer studio? How to declare variables in that segment?
Part Number: MSP430FR5962 I have a question about the accuracy of the on-chip temperature sensor. Reading about the T sensor from various documents, I’m a bit confused as to the accuracy specification.
I have implanted equation on section 1.14.3.3…
