Part Number: MSPM0G3107-Q1 Tool/software: Hi,
I'm looking for clarification of the specification pointed to in the section shown below.
Is the diode current referring to the pin protection diodes and the current is the maximum allowed before the device…
Part Number: MSPM0G3107-Q1 Tool/software: Hi all,
I looked on the example from TI regards ECC and Parity of RAM. I took it and adapted and it works for LS0-LS7, GS0-GS3 and M0 but for M1 is not working and I cannot figure out why.
This is how I declared…
Part Number: MSPM0G3107-Q1 Other Parts Discussed in Thread: MSPM0G3107 , SYSCONFIG Tool/software: I'd like to configure generic security levels on MSPM0G3107 uC to Protection Level 1 with following customisation as highlighted:
This will be applied…
Part Number: MSPM0G3107-Q1 Tool/software: Hi,
The code has other I2C subroutines that work, but for some reason the I2C interrupts are not happening and the IRQ Handler is not entered from this subroutine.
Any ideas?
Thanks,
Dave
ps. subroutine…
Part Number: MSPM0G3107-Q1 Other Parts Discussed in Thread: MSPM0G3105-Q1 , MSPM0G3106-Q1 Hi, Support Team
about MSPM0G series for Automotive grade, do we have plan release MSPM0G3106-Q1 and MSPM0G3105-Q1 in this year?
if any suggestion, Please advise…
Part Number: MSPM0G3107-Q1 Tool/software: I m using Sequence mode then a set PWRDN and ENC bit of CTL0. But after convertion of all configured channel ENC is clear aven PWRDN automaticaly cleared. So Next other trig event is ignored.
Specification say…
Part Number: MSPM0G3107-Q1 Hi,
We use MSPM0G3107-Q1 as LIN responder and LIN tool (SPY3) as commander.
First, commander send whole frame to responder and responder is OK to get "BREAK", "DEL", "SYNC", "PID"
Responder is OK to sent 2 responses to…
Part Number: MSPM0G3107-Q1 hello，
i have one question about the I/O pin
As shown in the figure below, Mcu's I/O port is equipped with a clamp diode
1）I want to know if I/O will be damaged when there is forward overvoltage and reverse overvoltage…
Part Number: MSPM0G3107-Q1 Other Parts Discussed in Thread: MSPM0G3507 Tool/software: Hi
I got a 3D model(STEP) from ultra librarian through the link provided by TI.
https://vendor.ultralibrarian.com/TI/embedded/?gpn=MSPM0G3107&package=RHB&pin=32&sid…
Part Number: MSPM0G3107-Q1 Other Parts Discussed in Thread: MSPM0G3107 , SEGGER , UNIFLASH , MSPM0G3507 Tool/software: Hi,
I have recently used J-flash lite software along with a Jlink Base debug probe in order to flash my MCU "MSPM0G3107".
In order…
