Part Number: MULTI-CAL-SYSTEM Other Parts Discussed in Thread: PGA309 Does the temperature calibration for the PGA309, using the multi-cal-system, have to be in order? For example, if I want to compensate the sensor at -40°F, 23°F, and 85°F, do i need…
Part Number: PGA309 I have been struggling with communication errors with the Multi-Cal system.
Yesterday, i successfully calibrated a 4-20mA transmitter. After calibration, I used the muli-cal system/program (Rev J) to read the EEPROM. After reading…
Hello Dhiviandran,
Are you using the multi-cal system? This is the only active EVM that uses the R232 connection: Multi-Cal-PGA309 System User Guide
There is this existing thread from 13 years ago when someone looks to have run into the same problem: PGA309EVM…
Part Number: MULTI-CAL-SYSTEM Other Parts Discussed in Thread: PGA309 , PGA309EVM-USB ,
Since there is not a PGA309 Test PCA available for the Multi-Cal-Sytem, is there any way to connect the PGA309 test board from the EVM kit to the multi-cal system so…
Part Number: MULTI-CAL-SYSTEM Other Parts Discussed in Thread: PGA308 , PGA309 I installed the Multi-Cal-EVM program on a PC with newly installed Windows 10 and brought the existing scripts and settings,
but the error "-410" on the 34401A does not work…
Part Number: MULTI-CAL-SYSTEM Other Parts Discussed in Thread: PGA309 I'm having trouble using the MULTI_CAL_PGA309 installer. I get to the following point and then cannot continue past this:
Since this computer already has the NI software installed…
Part Number: PGA309 Other Parts Discussed in Thread: MULTI-CAL-SYSTEM I have added a second stage to the output of the PGA309. Can I use this output (secondary) and my 1 wire programing to calibrate the sensor using the multi-cal set up? Do I need to…
Part Number: MULTI-CAL-SYSTEM Other Parts Discussed in Thread: PGA308 , , PGA309 I am now calibrating the PGA308 using MULTI-CAL-SYSTEM.
The voltage is read from the MULTI-CAL-SYSTEM Labview software using the HP34410A as an RS232 script. The Keysight 34461A…
Part Number: MULTI-CAL-SYSTEM Other Parts Discussed in Thread: PGA308 I am trying to run the multi cal system with the PCA test cards in 3-wire mode, but I keep getting the following error,
These pass the fast scan and then fail at the first point on…
Part Number: MULTI-CAL-SYSTEM Other Parts Discussed in Thread: PGA309 ,
Hi all, I am having 2 problems.
1- Keysight 34401a dmm keeps getting -410 error.
Pretty much the same, the only difference is that I use PGA309, not 308:
2- Temperature setting changes…
