Aaron,
This is tough to answer not know what function the customer likes in the CD74ACT257 device. Do you know what they are tying to do in their system so that we can help find the correct switch.
The CD74ACT257 function looks to be like a 4-channel…
Hi Josh,
We currently do not offer high-voltage switches. If you are open to using a multiplexer instead, the MUX36S08 or MUX36D04 can support signals up to +/- 18V. To achieve low distortion with these devices, a buffer with a high impedance input…
The following table helps select th e right multiplexer and switch with Mid Voltage 25V =< VSIGNAL =< 99V in different configurations:
Precision , Protection , Automotive , Extended Temperature
Configuration
16:1…
Noam,
The power consumption should not change based on Ven = 0 or Ven=3.3V for this device.
Additionally, I suggested the MUX36D04 devices to you since you mentioned being powered by a battery. We also have the MUX50X family besides the MUX36XXX…
Part Number: TDC1000-C2000EVM Hello.
Once I asked about how to multiplex the TDC1000-C2000 EVM. Please refer to the forum discussed before ( https://e2e.ti.com/support/sensors/f/1023/t/603257 ).
1. First of all, the engineer in the form says I have…
Thomas,
There are several families of switches you can look at for switching 5V and 10V low current signals.
What do you think about the MUXXXXX family of parts like the MUX36D04? There is a TI design with this mux in a data acquisition system.
…
Jackson,
To support a ±12V input swing we have 3 families of devices. The first being the MUX36xxx family. This is our low leakage, low capacitance muxs that operate up to 36V signal swing. This family has an 8:1 configuration and a differential 4…
Hi Bob,
The ADS122U04 is slightly over the budget and slightly over the accuracy I need.
I am thinking to use ADS1120 with Mux on its input, such as MUX36D04(8 to 2), so I can use CH0 & CH1 of the ADC for all measurements, and CH2,3 will be used as…
Marek Hi,
I changed the input stage of the INA826 (Attached) and now I am using an analog MUX (MUX36D04).
I need to know what will happen if the selected MUX "+ Input" is floating? What will be the output on ANA4? ("-" is connected to GND)
One of…
Part Number: PGA460-Q1 Other Parts Discussed in Thread: MUX36D08 , MUX36D04 , MUX36S16 , MUX36S08 , , PGA460
PGA460-Q1 Multiplexing in Half-Bridge Driver Mode for Mono-static or Bi-static Transducers
The PGA460Q1HBMUX reference design allows a single…
