Search tips
Showing 50 results View by: Thread Post Sort by
    Answered

  • MUX508: Regarding tolerance in minimum working voltage of MUX508

    Resolved
    Part Number: MUX508 Other Parts Discussed in Thread: MUX509 , Hello TI support, We are working on one industrial product where we have +/-5V in our board. MUX509 is required multiplex channels having signal upto 3mV & 7KHz frequency. We have such 5…
    • Resolved

  • MUX508: intermittent short or abnormal channel behavior

    Part Number: MUX508 Tool/software: I'm using the MUX508IPWR in my design to switch between multiple analog input sources. The VDD is connected to +12V, VSS is GND. The control lines (A0–A2 and EN) are driven by a 3.3V MCU. We’re observing an intermittent…
    • Answered

  • MUX508: need to survey replace part for less Ron On-resistance

    Resolved
    Part Number: MUX508 Other Parts Discussed in Thread: TMUX1208 , SN74LV4051A Tool/software: Hi TI teams, we use to 2 pcs MU508 to avoid I2C address conflit when the device address is the same as PCA9548. It seems that not a good choice. Because Ron…
    • Resolved
    • Answered

  • MUX508: SPICE Model file describes MUX36S08 and MUX36D04 instead of MUX508

    Resolved
    Part Number: MUX508 Other Parts Discussed in Thread: MUX36D04 , , MUX36S08 , TINA-TI The MUX508 product page has a TINA-TI Spice Model available for download. When I download the .TSM file and open the macro in TINA-TI, it looks like the subcircuit describes…
    • Resolved
    • Answered

  • MUX508: Unused pins

    Resolved
    Part Number: MUX508 Hi Team, Could you tell me how we should deal with Unused pins of MUX508? It can be left floating or both side should be tied to GND or Vcc? Regards, Takashi Onawa
    • Resolved

  • MUX508: MUX508IDR and MUX508ID new datasheet shows NiPdAu | Sn lead finish. Can you please confirm whether that the parts are having the SN plating or NiPdAu plating?

    TI Thinks Resolved
    Part Number: MUX508 Hi Team. MUX508IDR and MUX508ID new datasheet shows NiPdAu | Sn lead finish. i have also checked using path " TI.com > Quality & Reliability > Material Content Search ", but not getting proper details mentioned in below Screen shot…
    • Answered

  • MUX508: MUX508 to replace ADG508F.

    Resolved
    Part Number: MUX508 Other Parts Discussed in Thread: MPC508 Hi Ti, I had recently looked at the ADG508F but would like to know whether MUX508 has the best fit to does the same feature? ADG508F
    • Resolved
    • Answered

  • RE: MUX508: Switch to Ground - Multiplexing in h-bridge configuration

    Resolved
    Hi Tom, The MUX508 can be used for rail to rail operation between VSS and VDD. Since you are primarily operating on the positive voltage side (0V to 25V), you can use the device in single supply mode with VSS tied to GND (0V), VDD = 25V and the signal…

  • RE: MUX508: Beyond-the-Rail Input function vs MAX14752

    Hi Tess, The MAX device does not pass voltages beyond rails - it has overvoltage protection. The MUX508 requires external protection devices such as TVS diodes to help with overvoltage protection. The internal structure is going to be similar…
    • Answered

  • MUX508: MUX508IDR vs MAXIM MAX4708 output Voltage difference

    Resolved
    Part Number: MUX508 Hi, I am Trying to find an solution for a problem that ist poped up after changing a Multiplex device on a Board. Difference signals are switches trough two Multiplexer. After that the Signal will go to a AD converter. we…
    • Resolved

Didn't find what you are looking for? Post a new question.